Print Page | Close Window

A-5 double triggers

Printed From: Tippmann Paintball
Category: Tippmann Paintball
Forum Name: New Player Forum
Forum Description: New to the sport? Get Professional Advice Here!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=169075
Printed Date: 21 December 2025 at 10:36am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: A-5 double triggers
Posted By: MetalMilitia
Subject: A-5 double triggers
Date Posted: 31 July 2007 at 10:26pm
Would I be able to walk on an A-5 double finger trigger with two fingers? Or are they designed more for reducing fatigue and increased comfort? It doesn't seem like a standard A-5 double trigger would be able to reset fast enough to walk on it without something else to aid it like a response trigger, correct?

Also, does an E-grip increase semi-auto speed capability? Or is it pretty much only good for burst and full auto?



Replies:
Posted By: RoboCop
Date Posted: 31 July 2007 at 11:49pm
The double trigger will walk as fast as your fingers can pull. The JCS Dual trigger might be better for walking though as you can adjust it. The E-grip is great for semi. I only used semi when I had an e-grip because it was so easy and fun for me. Also it helped me get better at walking for the tournament scene.


Posted By: MetalMilitia
Date Posted: 01 August 2007 at 12:02am
Aaah thanks. Well my first experience with an aftermarket double trigger for the A-5 was not too great. I expected it to work out of the package but it didn't work properly once I cocked the gun. Even after filing down any of the parts that would most likely be causing the problem. I think I might order the kit made by tippmann to play it safe.

How exactly does the E-grip help semi-auto?


Posted By: sinisterNorth
Date Posted: 01 August 2007 at 8:09am
Increases your capable ROF.

-------------
Pumpker'd; (V.) When a pump player runs up and shoots you at point blank range because you thought 20bps made you good.


Posted By: RoboCop
Date Posted: 01 August 2007 at 11:01am

The e-grip is an electronic board with a little micro switch that the trigger hits in order to set everything off. The micro switch has a much lighter pull than having to pull on the sear to trip the sear. So once the e-grip is in, you could just tap the trigger gently and it will go off. If you make it really sensative, you could just be running and the trigger will nudge the switch just enough to fire the marker. You most likely won't be making it that sensative.



Posted By: Whiting
Date Posted: 02 August 2007 at 4:30pm
Just walking with a double trigger on a standard grip isn't going to work well. I suggest you get an E-grip with a double trigger and play on Turbo. With the Turbo setting the gun fires once when pulled in, and once when released. If you walk with that setup, you can achieve a pretty high BPS.

-------------


Posted By: netramakin
Date Posted: 02 August 2007 at 5:27pm

Buy a Rampage or JCS double trigger

EDIT: Just make sure you get the right one: for eGrip or stock



-------------

"I'm a riddle so strong, you can't break me."


Posted By: Whiting
Date Posted: 02 August 2007 at 6:06pm
Originally posted by netramakin netramakin wrote:

Buy a Rampage or JCS double trigger


I second that.
I run a JCS double trigger on my E-grip.


-------------


Posted By: EssDub
Date Posted: 02 August 2007 at 8:27pm

The Pull and release fire is auto response...Turbo is every shot is semi till you hit it twice real fast then it goes in 3 round burst...atleast for e grip out the box WAS board..E grip also puts you at about 15bps with out internal mods...

Neather set up auto or turbo is legal in limited speed ball

Negatives about the egrip though are you will get a "bounce" call when its low on pressure usually around 1k psi..it will stick in full auto even if its programed on something else

Full can be broke by hittn the trigger again



Posted By: mod98commando
Date Posted: 02 August 2007 at 10:45pm
Originally posted by EssDub EssDub wrote:

...

Negatives about the egrip though are you will get a "bounce" call when its low on pressure usually around 1k psi..it will stick in full auto even if its programed on something else

Full can be broke by hittn the trigger again



I have no idea what you're talking about there but, then again, I have the APE board so maybe it's a WAS board thing.

I use a JCS double trigger with my egrip which works fairly well but I think it could benefit from having a trigger stop. I didn't like how it felt using the installation described in the instructions with the 2 springs so I threw my pen spring back in and adjusted it to have a really short pull before activating the switch. It has a slight bit of extra travel after firing but almost none before so I can still walk it pretty quickly. I may drill a hole through the back of the trigger guard and stick a long screw through it to make a trigger stop to get a little more out of it.


-------------
oreomann33: Everybody invades Poland

Rofl_Mao: And everyone eats turkey

Me: But only if they're hungary

Mack: Yeah but hungary people go russian through their food and end up with greece on everyth


Posted By: netramakin
Date Posted: 02 August 2007 at 11:59pm

Originally posted by mod98commando mod98commando wrote:

Originally posted by EssDub EssDub wrote:

...Full can be broke by hittn the trigger again...


I have no idea what you're talking about

Me neither

Originally posted by mod98commando mod98commando wrote:

maybe it's a WAS board thing.

Sounds like it.

Originally posted by MetalMilitia MetalMilitia wrote:

Well my first experience with an aftermarket double trigger for the A-5 was not too great. I expected it to work out of the package but it didn't work properly once I cocked the gun.

I just got an eGrip Rampage Pro double and the thing is amazing...well worth the extra $40.



-------------

"I'm a riddle so strong, you can't break me."


Posted By: EssDub
Date Posted: 03 August 2007 at 5:11am

Yeah mine is not rampage ...Basicly what happens when i get low on air ill pull the trigger and it will "run away"...

To stop it from firen i just tap the trigger again

My trigger goes nuts before my cyclone does



Posted By: new 2006
Date Posted: 04 August 2007 at 11:39am

I agree that you need to have some sort of eletro board, I put a 2x on my A-5 with out any other mods and my index finger would hold up the recock.  I left the gaurd and put the single trigger back on.  It feels good for me and I like the way it works.

That is with out any type of board or an response trigger system.  I imagine it would work quite well with a board installed.



-------------
A5 on HPA
12" Lapco Bigshot & AutoSpirit (SS)
12" J&J ceramic
Freak Jr kit 14"
98 Custom on CO2
Tippmann x-kit
2x trigger
12" J&J ceramic
F1 Chrony



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net