Gun Maintenace and Repair - JCS Dual trigger

Print Page | Close Window

JCS Dual trigger

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=169418
Printed Date: 10 January 2026 at 10:48pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: JCS Dual trigger

Posted By: QcXf
Subject: JCS Dual trigger
Date Posted: 14 August 2007 at 3:46am

I have an a-5 with a WAS board and a jcs dual trigger. I have a problem with the trigger. I get it tuned and then after shooting for a while it stops working. Like I walk it for like 20 shots then it like undoes itself I cant shoot. Any suggestions?

Replies:

Posted By: mod98commando
Date Posted: 15 August 2007 at 1:42am

What do you mean it undoes itself? In my experience, that trigger is a royal pain to setup using the method JCS intended for this trigger. I messed with the thing for over an hour and I couldn't get it anywhere near as nice as I expected so I deviated from the instructions. I basically just put the pen spring back in, took the second spring out entirely, and messed with it until the pull was really short. The pull distance to fire is very short and there is a little extra pull after firing but it's extremely light so I can walk it much faster than I could when it was setup "properly". Of course, this was just done out of frustration and it worked out but I've heard of other people doing this as well. I would just keep messing with it or try what I did if you get fed up with it. In theory, their method should work fine but for some reason it's way harder than you'd expect to get it to work well.

-------------
oreomann33: Everybody invades Poland

Rofl_Mao: And everyone eats turkey

Me: But only if they're hungary

Mack: Yeah but hungary people go russian through their food and end up with greece on everyth