A5 E-Grip out of control........
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=169446
Printed Date: 01 July 2024 at 3:52pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: A5 E-Grip out of control........
Posted By: 2SSB
Subject: A5 E-Grip out of control........
Date Posted: 15 August 2007 at 6:30am
|
|
Replies:
Posted By: RoboCop
Date Posted: 15 August 2007 at 8:00am
| Low air. Fill up the tank. When it is low on air, the hammer doesn't have enough pressure to be pushed all the way back to be cocked again. |
Posted By: Roweazie
Date Posted: 15 August 2007 at 8:50am
|
first remove the silver pin on your trigger, and see if it would resolve it. ------------- 
|
Posted By: 2SSB
Date Posted: 16 August 2007 at 5:31am
| The tanks is fill when I put it on..... |
Posted By: 2SSB
Date Posted: 16 August 2007 at 5:36am
Roweazie what silver pin on the trigger? The armature pin that goes on to the solenoid....... 
|
Posted By: Roweazie
Date Posted: 16 August 2007 at 7:49am
|
Notice the metal peice on the back of the trigger, remove that and try it out.
What exactly "all ape on me", anyway?
-------------
|
Posted By: jesseat956
Date Posted: 16 August 2007 at 3:29pm
| if u remove that the trigger still works???? |
Posted By: Jason Doering
Date Posted: 17 August 2007 at 6:31am
|
Posted By: Roweazie
Date Posted: 17 August 2007 at 8:17am
|
BTW, the pin was talking about is called: Slider pin & w/ slider spring.
-------------
|
jesseat956 wrote:Posted By: mod98commando
Date Posted: 20 August 2007 at 11:04pm
|
The slide that he suggested you remove is used in a mechanical trigger setup to push the edge of the sear up which will cause the back end to go down and release the rear bolt. That is what normally fires the gun. When you get an egrip, the solenoid pushes the armature pin into the bottom of the sear where the trigger slide usually does. That's why you don't need it anymore when you go electronic. And, as mentioned, the slide usually interferes with the operation of the egrip so it's best to remove it while you have the egrip installed. If it is still in there, remove it and see if the problem persists. EDIT: Jason Doering, I don't know what possesses you to write in such a light color but it's a horrible idea, don't do that. ------------- oreomann33: Everybody invades Poland Rofl_Mao: And everyone eats turkey Me: But only if they're hungary Mack: Yeah but hungary people go russian through their food and end up with greece on everyth |
Posted By: 2SSB
Date Posted: 27 August 2007 at 5:43am
|
Thx to Roweazie and to mod98commando for all the help. Roweazie "going ape on me" just another word for going out of control........ Meaning when I pull the trigger and then release it again it still carries on firing, it does not stop even after I have released the Trigger. the only way to stop it is to wait for the gas to finish or take of the gas...... |
Posted By: abacus420
Date Posted: 08 September 2007 at 9:25am
|
Thx man i was flipping out last weekend , i was playing and i would use a tank of air every game, my A-5 was just running on and on. air was free all day luckly but i still couldnt figure out why this would just run on. Got the double trigger a few days b4 and noone said anything about removing that pin **edited** thx you made my weekend MY SETUP TIPPMANN A-5 TIPPMANN FLATLINE BARREL TIPPMANN 6 POS. ADJ. Stock TIPPMANN A-5 DOUBLE TRIGGER |
Posted By: Jason Doering
Date Posted: 09 September 2007 at 12:24pm
| ok sorry bout the white text...every time i sign on my text likes to switch to white so i have to switch it to black |