Pro/Carbine Help
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=169716
Printed Date: 29 November 2025 at 8:20am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Pro/Carbine Help
Posted By: soonerdude05
Subject: Pro/Carbine Help
Date Posted: 26 August 2007 at 4:33pm
|
So yesterday I was playing paintball, and I let my friend borrow my Pro/Carbine, and when he was playing, this little silver hollow tube fell out of the barrel, and now the gun won't work. Normally I can fix most small problems, but I have no ideas with this. Any help would be greatly appreciated, thanks.
------------- 
|
Replies:
Posted By: ShortyBP
Date Posted: 26 August 2007 at 5:37pm
|
Check the schematic of the Pro/Carbine.
I'd bet that hollow silver tube is your powertube... and it came loose because the velocity screw is gone. It's not a difficult re-install, if you still have a velocity screw. Edited to add: Now that I think about it, if it is indeed the powertube... that also means your front bolt was missing? As the powertube wouldn't have flown out with the front bolt in place. I would disassemble your ProCarbine, check against the schematic to see what parts you may or may not be missing. |
Posted By: Snake6
Date Posted: 26 August 2007 at 8:36pm
|
I had this type of problem when I first got my P/C. The powertube itself actually broke right at the end where it meets the front bolt, and half the powertube came out. The only way to fix it is to get a new powertube.
------------- 
|
Posted By: soonerdude05
Date Posted: 28 August 2007 at 5:00pm
|
Well I seem to have just fixed it, and all I did was take everything apart, then put it back together. Just went in the backyard and shot it and it works fine. Thanks for the help guys. -------------
|