e-grip boards
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Upgrades and Customizing
Forum Description: Trick it out!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=172155
Printed Date: 23 February 2026 at 2:58am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: e-grip boards
Posted By: woodsballman
Subject: e-grip boards
Date Posted: 17 December 2007 at 7:08pm
|
What is the stock board in a custom pro e-grip and what are the other boards that are made for it and what are the pros and cons of the other boards. ------------- tippmann custom pro E-trigger cyclone feeder 21" core barrel or 11" stock barrel 20 and 9 oz co2 tanks or Brass Eagle Talon Ghost with copperhead red dot scope and a wooden stock |
Replies:
Posted By: jordanpischke
Date Posted: 17 December 2007 at 7:33pm
|
The new egrips from Tippmann have a WAS board in them. You can also get an APE board installed into your egrip. Someone on here had a chart with infor on both boards. I know the APE goes up to 25bps and the WAS goes to 30. The APE has built in buttons to change firing modes. ------------- 
|
Posted By: woodsballman
Date Posted: 17 December 2007 at 7:40pm
|
i dont think that the board i have is eitheir of them because it says you can only get 18 bps out of it. If i was to upgrade to one of them boards what would i have to get so my cyclone feeder would keep up with it??
------------- tippmann custom pro E-trigger cyclone feeder 21" core barrel or 11" stock barrel 20 and 9 oz co2 tanks or Brass Eagle Talon Ghost with copperhead red dot scope and a wooden stock |
Posted By: sinisterNorth
Date Posted: 17 December 2007 at 8:00pm
|
You would want to look into the Vortex Mods and maybe the QEPH.
------------- Pumpker'd; (V.) When a pump player runs up and shoots you at point blank range because you thought 20bps made you good. |
Posted By: woodsballman
Date Posted: 17 December 2007 at 8:17pm
|
whats the max bps of the APE rampage? ------------- tippmann custom pro E-trigger cyclone feeder 21" core barrel or 11" stock barrel 20 and 9 oz co2 tanks or Brass Eagle Talon Ghost with copperhead red dot scope and a wooden stock |
Posted By: jordanpischke
Date Posted: 17 December 2007 at 10:13pm
|
The APE rampage was the APE board I was talking about it has a max of 25bps. Your egrip may be an older one and personally I have no idea what kind of board is in the older egrips. -------------
|
Posted By: jordanpischke
Date Posted: 17 December 2007 at 10:20pm
|
I just checked on Tippmann's website and their electronic trigger fires up to 17bps. Now it doesn't even say what board is in it so I really have no idea. http://www.tippmann.com/product_guide/accesDetails.aspx?id=16 - http://www.tippmann.com/product_guide/accesDetails.aspx?id=1 6 This seems weird to me because I have researched an Egrip for my 98 custom and am going to buy one soon and where ever I look for an Egrip they have a WAS board in it because Tippmann's new egips come with the WAS board stock, but on their website it show their old E trigger. I would guess this is the one you have and it doesn't seem to say what board is in it. -------------
|
Posted By: jordanpischke
Date Posted: 17 December 2007 at 10:31pm
|
I have found the chart! http://www.tippmann.com/forum/wwf77a/forum_posts.asp?TID=161787&PN=0&TPN=1&RN=1 - http://www.tippmann.com/forum/wwf77a/forum_posts.asp?TID=161 787&PN=0&TPN=1&RN=1 -------------
|
Posted By: Panda Man
Date Posted: 18 December 2007 at 10:04am
hmm. never knew APE had adjustable Ramp... wow, I might buy an APE board just for that. 
------------- 
|
Posted By: thejudge
Date Posted: 18 December 2007 at 11:39pm
|
Not sure if that chart is completely correct. I have the WAS board and have automatic mode, my turbo is adjustable (by making the limit of bps higher or lower), and maybe more ------------- Stay low, run fast, and hope that paintball doesn't hit your... http://www.deltasquad.info/"> 
|
Posted By: jordanpischke
Date Posted: 19 December 2007 at 9:27am
|
Ya some of this stuff is a little off. Even from website to website. I got this info off Tippmannparts for the APE rampage board. 8 base firing modes: This is off APE's website: Direct Circuit Board Replacement For The Existing E-Grip™ Features a State-of-the-art RISC Microcontroller Weather resistant Conformal Coating Extended Battery life—Almost 3 Times! Push button selection to change Firing Mode Visual LED Mode Indicator User Programmable 7 Firing Modes and 15BPS Operation Semi Automatic Turbo+ Full Automatic 3 Round Burst Response Rampage tm X-Mode Rate of Fire From 15 to 25BPS! Adjustable Dwell and Debounce Programmable Ramping and Turbo+ Mode 1 year warranty And this is off PBreview: Features a state-of-the-art RISC Microcontroller So each one is a little different. -------------
|
Posted By: woodsballman
Date Posted: 19 December 2007 at 6:43pm
|
so if i do decide to get one im gunna get the APE and the vortex mod for my cyclone. Were would be the best place to get this stuff for cheap? and if i do get the vortex mod would i need the lightning rod to go with it or is that something you dont really need? ------------- tippmann custom pro E-trigger cyclone feeder 21" core barrel or 11" stock barrel 20 and 9 oz co2 tanks or Brass Eagle Talon Ghost with copperhead red dot scope and a wooden stock |
Posted By: thejudge
Date Posted: 19 December 2007 at 10:59pm
|
http://www.actionvillage.com - www.actionvillage.com and http://www.paintballdiscounters.com - www.paintballdiscounters.com are both good places to look. I think one of them even has a full kit of the vortex mods (I could be wrong) but they both always have good prices. ------------- Stay low, run fast, and hope that paintball doesn't hit your... http://www.deltasquad.info/">
|
Posted By: SSOK
Date Posted: 21 December 2007 at 5:52pm
|
You dont need both. The vortex was the only thing they sold for a while. ------------- 
|
woodsballman wrote:Posted By: Panda Man
Date Posted: 21 December 2007 at 9:16pm
|
if your buying Tippmann parts... just go threw tippmannparts.com no brainier.  -------------
|
Posted By: woodsballman
Date Posted: 04 January 2008 at 6:01pm
|
sorry to bumb this thread but how hard is it to install the vortex and ape board? ------------- tippmann custom pro E-trigger cyclone feeder 21" core barrel or 11" stock barrel 20 and 9 oz co2 tanks or Brass Eagle Talon Ghost with copperhead red dot scope and a wooden stock |
Posted By: Papiriqui629
Date Posted: 06 January 2008 at 11:46am
|
So a quick question to you all. How many BPS will an E-grip with the WAS board shoot on a stock marker. No vortex mod, no QEPH just the plain stock marker and the e-grip? I ask this because i want to buy the e-grip with the APE board but tippmann pros dont have it in stuck. I have to call tomorrow to make sure they do not have it, because if they dont they i'll buy the WAS e-grip and later upgrade to the APE. |
Posted By: jordanpischke
Date Posted: 06 January 2008 at 12:14pm
The egrip wil shoot the same, but you will probably have to lower the bps. I believe the stock cyclone is 15bps. -------------
|
Posted By: Papiriqui629
Date Posted: 06 January 2008 at 1:37pm
| Yeah yeah im not looking for more than 15bps since i think i would be wasting a lot of balls, but i was wondering because since tippmannpros dont have the ape e-grip in stock i wanted to get the was e-grip and later upgrade since i have read its a lot better and has a lot more options. Thanks |
Posted By: woodsballman
Date Posted: 07 January 2008 at 7:19pm
Just go to a different site^^^^. And does anyone have the answer to this question??
------------- tippmann custom pro E-trigger cyclone feeder 21" core barrel or 11" stock barrel 20 and 9 oz co2 tanks or Brass Eagle Talon Ghost with copperhead red dot scope and a wooden stock |
Posted By: DeMented 6521
Date Posted: 10 January 2008 at 12:36am
|
ok, here is a dumb one, my x7 e trigger manual says it goes up to 25bps
any more then 20 the cyclone cant keep up so it will chop, so i have it set for
16 untill my cyclcone upgrades come in. My question is this, do the other boards have that supid safety full auto safety burst where i have to squeeze off trigger 3 times in a second to actuate, or can i bypass that having to just put selector switch on FA and pull trigger once to engage. I really hate switching to FA and pull trigger a few times before it goes burst or rock n roll. ------------- Most people go through life wondering if they made a difference. The Marines don't have that problem!" - Ronald regan, President of the United States - 1985 |
Posted By: jordanpischke
Date Posted: 10 January 2008 at 9:21am
|
The WAS board is setup like that yes, but I'm pretty sure the APE board can go full auto without the trigger pulls before. -------------
|