Gun Maintenace and Repair

Print Page | Close Window

help

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=172522
Printed Date: 18 August 2026 at 1:50am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: help

Posted By: Gascan
Subject: help
Date Posted: 04 January 2008 at 10:39am

Hello, I need to get inside the valve on a model 98? It's not on the owner's manuel I practically read the whole thing, and the schematic in the manuel wasnt very helpful in opening up the valve itself. Any help would be great. Thanks.

Replies:

Posted By: tallen702
Date Posted: 04 January 2008 at 11:16am

you'll need to remove the valve from the power-tube body by removing the assembly from the receiver. Then remove the gas-line and the velocity screw. Finally, take a wooden dowel and place it down the power-tube and use it to push the valve out of the power-tube body.

Once the valve is out, you will see that taking it apart is as easy as removing a C-clip from the front of the valve. Everything then slides out. Be careful to catalog what order everything comes out so you can put it back together properly.

-------------
<Removed overly wide sig. Tsk, you know better.>