Full Auto issue... Tipp. A-5
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=173414
Printed Date: 26 February 2026 at 1:07am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Full Auto issue... Tipp. A-5
Posted By: Jihad
Subject: Full Auto issue... Tipp. A-5
Date Posted: 12 February 2008 at 12:08am
|
Hi all! So here is my problem...Tipp. A-5 with Rampage board (and a bunch of other upgrades). On the full auto setting at 15bps only im getting it to shoot like 10 balls then i have to cock it again. I put fresh bttry in it and clean it all the time. So wondering what it could be. If you know plz post with ur solution...not many Airsmiths in my area so need all the help i can get.
------------- "There's no crying in paintball!" |
Replies:
Posted By: The Guy
Date Posted: 12 February 2008 at 2:43am
|
Are you using CO2 or HPA? CO2 will experience shootdown with high rates of fire. ------------- http://www.anomationanodizing.com - My Site 
|
Posted By: Jihad
Date Posted: 12 February 2008 at 5:57am
|
hpa.
------------- "There's no crying in paintball!" |
Posted By: Papiriqui629
Date Posted: 12 February 2008 at 7:52am
|
This sounds like a pressure problem, check orings and power tube and see if there is anything wrong there. Strip apart the marker and check everything carefully to see if there is anything that is not supposed to be there. |
Posted By: ShadowRam
Date Posted: 13 February 2008 at 4:15pm
| Are you using the A-5 Low Pressure Kit? |
Posted By: Jihad
Date Posted: 13 February 2008 at 7:13pm
|
nope not using LPK. I like the clip i have on it hehe.
------------- "There's no crying in paintball!" |
Posted By: killerdove
Date Posted: 13 February 2008 at 8:05pm
|
um make sure the dwell on the board isnt to low and that the board is set at the bps you want ------------- Tippmann A-5 E-Grip(ape) All-American barrel Techt cyclone JCS double trigger |
Posted By: Jihad
Date Posted: 15 February 2008 at 1:37pm
|
Ya i just read up on the dwell...and some others had the same issue says dwell might be the issue. TY i'll turn it up =) ------------- "There's no crying in paintball!" |