Cheytac M200 (pic heavy!)
Printed From: Tippmann Paintball
Category: Tippmann Paintball
Forum Name: Marker Gallery
Forum Description: Show us your guns!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=174718
Printed Date: 23 December 2024 at 6:27am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Cheytac M200 (pic heavy!)
Posted By: Cl0nE
Subject: Cheytac M200 (pic heavy!)
Date Posted: 10 April 2008 at 1:54pm
|
Well i've been good a keeping this a secret for this long, but it's just about time to finish this up so i guess i can go ahead and give out a few glimpses. This is a 1:1: copy of a cheytac M200.
It runs on low pressure (200psi) air. It has a all mechanical pneumatic ram and trigger, and is fed with a 10 round spring feed, via bolt action. Theres a lot more but i'm sure there will be questions... On with the pics! A bit of milling.. 
One doo-hickey :) 
One thing-a-ma-bob... 
Some more milling and a bit of aluminum... 
Hmmm... going to need a new grip :) 
better get started... 
getting there... 
... 
The trigger and another thingy-jingy... 
Mating the grip to the rail... 
Making progress... 
A little "extra" A5,... 
That a bit better... 
Some of the do-hickeys in action... 
"http://www.youtube.com/watch?v=ClflXTiGsz0" - Trigger video Going to need a mag to hide some stuff.. 
Made some room inside... 
Yes, more thing-a-ma-bobs :) 
A little detail work... 
Much better... 
Were going to need to cock this thing... 
MMMMM, bolt goodness.. 
bolt handle.. 
bolt complete 
Had a little set back, had to find somewhere to hide .700 cubic inches of air... 
This spot worked out nice :) 
Made a custom tombstone and volume chamber to fit... 
.707 cubic inch volume chamber... 
Fits like a glove, i should have made it one piece but this is more serviceable. 
Shroud time.... barrel adapter, 
 -------------  http://www.hogsden.net"> |
Replies:
Posted By: Cl0nE
Date Posted: 10 April 2008 at 1:54pm
Starting the carry handle...
ViolA! 
stock rail stops... 
welding up the Bi-pod tabs... 
On to the barrel, need to extend it and add a muzzle break... 
Test fit.. 
I used steel rods for the stock slide rails so it would be nice and sturdy, so i had to make some aluminum attachment points i could weld to... 
Heres the side plates i need to weld on... 
All welded up and bent to the contour of the top peice... I changed the cheek rest from the left to the right for mask clearance. it ended up giving me the perfect amount of mask clearance for my flex 8 
Test fit, and ready to tack... 
All ground and buffed out :D 
Almost done... 
Gets nice an small for transport... 
The big picture, still cant decide on wheter or not i should add the barrel extension, or just add the muzzle break? What does everyone think:question: ... 
 ------------- http://www.hogsden.net"> |
Posted By: ctchofday
Date Posted: 10 April 2008 at 2:12pm
|
dude.
------------- Xbl:PhantomReign97 
'99 Snpr II, ½d Karni, E-Orracle, 2k4 Spstk, 2k5 Prstk, PMR SE, A5, 98 |
Posted By: Brainless
Date Posted: 10 April 2008 at 2:14pm
Looks like something out of Men in Black. Can't wait to see it finished  ------------- 98 Custom Inline Stabilizer Lapco Bigshot Low Pressure Kit |
Posted By: Reb Cpl
Date Posted: 10 April 2008 at 2:36pm
Finish it. Anticipation sucks. 
------------- ? |
Posted By: carl_the_sniper
Date Posted: 10 April 2008 at 3:54pm
|
That is probably the best mod that I have ever seen.
|
Posted By: gardy90
Date Posted: 10 April 2008 at 4:25pm
very sweet gun, the m200 is too 
------------- "FIRST THERE" a-5 16" J&J ceramic polished internals X7 low profile hopper costom painted 20 oz tank |
Posted By: barn_user
Date Posted: 10 April 2008 at 4:39pm
| I envy your milling skills greatly. That is great work! |
Posted By: Ace_Of_Spades
Date Posted: 10 April 2008 at 4:41pm
|
ur prolly gunna be the person who insires me to start milling ------------- 
J. Thompson #5150- http://www.pbnation.com/showthread.php?t=2945831 - Happiness Is A Tupperware Fed Weapon |
Posted By: ukassassin69
Date Posted: 10 April 2008 at 4:49pm
| Clone... You sir are a god. |
Posted By: Susan Storm
Date Posted: 10 April 2008 at 4:52pm
|
Seriuosly. ------------- "No society can surely be flourishing and happy, of which the far greater part of the members are poor and miserable." |
ctchofday wrote:Posted By: ammolord
Date Posted: 10 April 2008 at 5:01pm
|
wow...........that.......kicks........major........butt..... . I LOVE IT!! ------------- PSN Tag: AmmoLord XBL: xXAmmoLordXx ~Minister of Tinkering With Things That Go "BOOM!"(AKA Minister of Munitions)~ |
Posted By: thejudge
Date Posted: 10 April 2008 at 5:02pm
dude seriously and wow ------------- Stay low, run fast, and hope that paintball doesn't hit your... http://www.deltasquad.info/"> 
|
Posted By: unvolution
Date Posted: 10 April 2008 at 5:28pm
first word that came out of my mouth |
Posted By: ThatGuitarGuy
Date Posted: 10 April 2008 at 5:40pm
|
I would love you forever if you made me something that looked like a Marine M40.
------------- Skillet: I've never been terribly fond of the look of a vagina |
Posted By: X-51
Date Posted: 10 April 2008 at 6:07pm
|
Awesome ------------- Once we clued in on the fact that life is finite, the thought of losing it didn't scare us anymore. The end comes no matter what, all that matters is how you wanna go out, on your feet or your knees? |
Posted By: sinisterNorth
Date Posted: 10 April 2008 at 7:12pm
|
Wow... /jaw drop ------------- Pumpker'd; (V.) When a pump player runs up and shoots you at point blank range because you thought 20bps made you good. |
Posted By: kurieitaa
Date Posted: 10 April 2008 at 7:19pm
|
vary nice indeed, cant wait for more picture goodness. ------------- 
[ http://kurieitaa.googlepages.com - My Web Site }-{ http://kurieitaa.googlepages.com/cpbg - My Paintball Guns ] |
Posted By: t_hop
Date Posted: 10 April 2008 at 7:54pm
|
dude, you are a man among mice. i want more pics. your the Jesus of the tippmann gods |
Posted By: JAS_Paintball
Date Posted: 10 April 2008 at 8:01pm
|
I just spent the last 10 minutes trying to describe my awe, but i just can't. its simply incredible dude. keep updating, i'm excited to see how this thing turns out. |
Posted By: Mack
Date Posted: 10 April 2008 at 8:43pm
whoah! ------------- 
|
Posted By: TinMan
Date Posted: 10 April 2008 at 8:55pm
|
Oh my.... oh my oh my oh my.... phenomenal
|
Posted By: unvolution
Date Posted: 10 April 2008 at 9:16pm
| my second reaction looking at this topic after picking up a paycheck from work... crying followed by i want one.... gimme |
Posted By: gangstermod1
Date Posted: 10 April 2008 at 9:27pm
 OMG simply amazing, very clean, very good, NICE JOB!
|
Posted By: xXK1CK1NVV1NGXx
Date Posted: 10 April 2008 at 9:30pm
|
------------- <Sig violation, Section 1> |
Posted By: Evil Elvis
Date Posted: 10 April 2008 at 9:48pm
|
Man ... I need to refinance my house one day and give you a call. Maybee tap into some of the equity.
As always amazing Work. ------------- 
|
Posted By: SSOK
Date Posted: 11 April 2008 at 11:51am
|
Dont play paintball with it... someone will try to mate with it... You should make a second one, same grip/valve/block/frame/etc but try to make it look some pistol that begs to pistol whip and looks like it fires paint grenades at 500 fps. ------------- 
|
Posted By: Ace_Of_Spades
Date Posted: 11 April 2008 at 11:53am
|
please for the love of all that is awsome, make a pistol mod of a 98 -------------
J. Thompson #5150- http://www.pbnation.com/showthread.php?t=2945831 - Happiness Is A Tupperware Fed Weapon |
Posted By: t_hop
Date Posted: 11 April 2008 at 1:48pm
|
but of course make it smallish and don't let it be 9 inchs long without the barrel on. thats a given... |
Posted By: Ace_Of_Spades
Date Posted: 11 April 2008 at 3:25pm
if people are in aw of a non completed m200 made from half a body of a tippy98...
im fairly positive he wont be doing any of that nonsense -------------
J. Thompson #5150- http://www.pbnation.com/showthread.php?t=2945831 - Happiness Is A Tupperware Fed Weapon |
Posted By: Cl0nE
Date Posted: 11 April 2008 at 3:44pm
|
Thanks for all the support fellas, i cant wait to see it finished (and shoot it!) myself:)
Pics are updated on the first page!! ------------- http://www.hogsden.net"> |
Posted By: Ace_Of_Spades
Date Posted: 11 April 2008 at 3:48pm
|
looking better and better, dont post any more pics until its finally done, im enjoying the suspense oh and make a video of it in action like in your backyard or something, id like to see how itd look from a moving standpoint -------------
J. Thompson #5150- http://www.pbnation.com/showthread.php?t=2945831 - Happiness Is A Tupperware Fed Weapon |
Posted By: Mitch_Naz
Date Posted: 12 April 2008 at 11:45pm
| Man, your sooo lucky. I wish I could make some custom stuff !! |
Posted By: unvolution
Date Posted: 13 April 2008 at 12:37am
| pvc and dremel... thats my approach... lots of pvc |
Posted By: SSOK
Date Posted: 13 April 2008 at 1:01am
|
And your marker will look like it was made from PVC and a dremel. If you can make something up to par with Cl0ne out of PVC while only using a dremel to fabricate it, you sir are brilliant. Anyone can shave PVC, and it looks like poorly shaved PVC. Clone has a milling machine and lathe of his own, which probably cost the price of a decent car. Hell, I have access to a mill and cant do half the stuff he does. I cheat and use CAD, and it still doesn't work. -------------
|
Posted By: unvolution
Date Posted: 13 April 2008 at 11:47am
| im still in high school... cant really afford that stuff....and pvc no matter how bad it looks.. is cheaper then ordering actual parts.... and will do the same job |
Posted By: jester819
Date Posted: 13 April 2008 at 3:18pm
| very nice cant wait till its done 2 see it |
Posted By: nu cidd
Date Posted: 13 April 2008 at 7:44pm
|
< =text/>_popupControl();
Wow... That things a beast, I cant wait to see it finished up, and painted. ------------- 
|
Posted By: macgyver
Date Posted: 15 April 2008 at 1:26am
|
Thats awesome. How many hours do you in it? ------------- "My gun shoots ropes so good that i rock climb with it, then when i get to teh top i pwn people snipa style cuz my 21 inch barrel gives me extra distance for headshots." -me but not me |
Posted By: mamasboi
Date Posted: 15 April 2008 at 11:44am
| O. M. G. |
Posted By: brglotus
Date Posted: 15 April 2008 at 12:05pm
| JUNK***Kidding, that's so awesome, can't wait to see it completed. Did this start life as an A5 or a 98? It looks more like an A5. |
Posted By: Kingtiger
Date Posted: 15 April 2008 at 3:30pm
 /jaw drop |
Posted By: t_hop
Date Posted: 15 April 2008 at 7:04pm
|
a5 brotha. there was a picture. but in my opinion he could make his own platform and just build his own gun types. He basically built this one except for the a5 recievers. I think tippmann might want to talk business with Cl0ne. that'd be sweet |
Posted By: Cl0nE
Date Posted: 16 April 2008 at 1:31am
|
I took a break the last two days, back to work today. I was able to get most of the done, just need to add the little jack leg, finish off the bottom, an add the butt plate. Tomorrow I'm doing the final tear down and will hopefully have it all %100 (minus paint) The weather looks good this week so hopefully i can get to the range and get some video, (and a little trigger time :D ) before i pack it up and ship it off.:(
It will be hard to let this one go... Blah, blah,blah,,, Pics updated on first page ------------- http://www.hogsden.net"> |
Posted By: unvolution
Date Posted: 16 April 2008 at 1:43am
| ... that bipod just really made my life easier in my building of one.... thank you so much.... now to just work on a pvc collapsible stock... |
Posted By: JagdAlex
Date Posted: 16 April 2008 at 9:58am
|
Seriously Clone, you really kick ass man! You obviously study or work in the industry like a mechanical engineer or something. Everything is perfect and fit really smoothly! You are gifted! Really, it is the nicest paintball sniper that I will probably ever see in my whole life. Is it made mostly in Alu? Because otherwise it would probably be way too heavy. Can you reveal the cost that you are selling it? Just to have an idea if I want to place an order with you! Just can't wait that you comeback with a report in regards to the accuracy of the gun! Man you did a godly job on that gun. You should seriously start talking business with Tippmann or other big paintball company!
|
Posted By: JagdAlex
Date Posted: 16 April 2008 at 10:03am
|
This is the real deal guys, Clone you almost did a flawless copy...really incredible!
|
Posted By: techietaichi
Date Posted: 16 April 2008 at 12:02pm
|
I am truly in awe man, wow. ------------- http://www.youtube.com/watch?v=kCZWhJCF6Ig"> 
|
Posted By: SSOK
Date Posted: 18 April 2008 at 9:18pm
|
Uno Questiono. What are you doing for paint? Ten round Tube or cyclone/tac cap? Also, is it bolt action or semi auto? -------------
|
Posted By: Cl0nE
Date Posted: 19 April 2008 at 2:07am
|
It's bolt action, with a ten round spring feed. I'll have pics and vids of the finished project soon. ------------- http://www.hogsden.net"> |
Posted By: strykerx15
Date Posted: 19 April 2008 at 11:51am
|
i think there should be a religion where paintballs worship you . jk this is the best modding iv ever seen done to any gun . keep up the good work . ------------- im not a sniper . im a HIDDEN RIFLE MEN |
Posted By: Project Irene
Date Posted: 19 April 2008 at 1:13pm
|
Posted By: chaloopy
Date Posted: 21 April 2008 at 11:46am
Yah what they said ------------- Tippmann 98 Custom Pro Polished Internals J & J 12" Ceramic Double Trigger Digial woodland camo reciever Empire Reloader B |
Posted By: WrongFoot
Date Posted: 26 April 2008 at 2:09pm
| You sir, are my hero. |
Posted By: Cl0nE
Date Posted: 26 April 2008 at 11:27pm
|
Alrighty then, update time :D Well i had everything ready to go, and POOF! i had another digital gauge go up in flames, well not literally but they all (including different brands) seem to end up "freaking out" and only display jumbled data.
Either way the end result is that it had to go. So I'm putting in a regular mini gauge instead :( I hate to compromise but im out of time and money to pursue it any longer, i'll revisit it again later. Anyway, Other than that and paint, she is done. And looking good i might add :) Shes a bit dirty from me molesting it every time I pass by it in the shop, so ignore my dirty paw prints all over it. Finished stock... 
Spring feed... 
Need paint but shes done!! Final assembly... 
 ------------- http://www.hogsden.net"> |
Posted By: sinisterNorth
Date Posted: 26 April 2008 at 11:37pm
|
Holy hell, mate! That looks incredible. Amazing work as usual. ------------- Pumpker'd; (V.) When a pump player runs up and shoots you at point blank range because you thought 20bps made you good. |
Posted By: DeTrevni
Date Posted: 27 April 2008 at 12:06am
|
... *asplode* ------------- Evil Elvis: "Detrevni is definally like a hillbilly hippy from hell"
|
Posted By: bravecoward
Date Posted: 27 April 2008 at 2:24am
|
you are going to be a great argument for paintball sniper noobs one day
------------- 
|
Posted By: kurieitaa
Date Posted: 27 April 2008 at 12:39pm
|
That thing is AwEsOmE, i do love the spring fed on the side, any idea on the color your going to paint it? -------------
[ http://kurieitaa.googlepages.com - My Web Site }-{ http://kurieitaa.googlepages.com/cpbg - My Paintball Guns ] |
Posted By: ammolord
Date Posted: 27 April 2008 at 6:37pm
------------- PSN Tag: AmmoLord XBL: xXAmmoLordXx ~Minister of Tinkering With Things That Go "BOOM!"(AKA Minister of Munitions)~ |
Posted By: ownagewith98
Date Posted: 27 April 2008 at 8:48pm
I would probobly piss my pants if I saw someone aiming that at me ------------- 
|
Posted By: unvolution
Date Posted: 29 April 2008 at 12:44am
| good god man.... |
Posted By: thejudge
Date Posted: 29 April 2008 at 1:25pm
|
what is the final color going to be? ------------- Stay low, run fast, and hope that paintball doesn't hit your... http://www.deltasquad.info/">
|
Posted By: ammolord
Date Posted: 29 April 2008 at 5:51pm
|
ya i know, same here. ------------- PSN Tag: AmmoLord XBL: xXAmmoLordXx ~Minister of Tinkering With Things That Go "BOOM!"(AKA Minister of Munitions)~ |
Posted By: thebuickguy
Date Posted: 30 April 2008 at 5:54am
|
WERE NOT WORTHY WERE NOT WORTHY
------------- Tippmann A-5 SAW stock E grip J&J Ceramic APEX tip Spyder AMG J&J Ceramic Tippmann 68 Carbine J&J Ceramic APEX tip Tippmann Prolite |
Posted By: Zippo25
Date Posted: 30 April 2008 at 12:07pm
| What would one have to pay for a custom setup like that? interested in havin somethign made. |
Posted By: MeanMan
Date Posted: 30 April 2008 at 3:20pm
|
Wow. I didnt click on this until now, thinking it was just another milsim gun, and an argument occured to make it long. But let me say, I was way long. ------------- 
hybrid-sniper~"To be honest, if I see a player still using an Impulse I'm going to question their motives." |
Posted By: Cl0nE
Date Posted: 03 May 2008 at 6:49pm
|
Heres the link to the entire gallery about http://www.hogsden.net/images/gallery/index.html - 365 pics I still need to get the video up. ------------- http://www.hogsden.net"> |
Posted By: dbug
Date Posted: 04 May 2008 at 8:39pm
|
It will be painted along the same way as the one in the movie shooter. ------------- http://imageshack.us"> 
|
Posted By: TEKahuna
Date Posted: 05 May 2008 at 5:53pm
|
Heavy much..? ------------- Gun Info: 98C E-Pro ACT 14in Stiffi Offset Mount RedDot 45mmScope Shocktech ShockFlyBolt RocketCock II Cyclone Feed Dog Leg All TechT Cyclone upgrades 4 guns and counting!! |
Posted By: kurieitaa
Date Posted: 05 May 2008 at 6:19pm
|
it's all aluminum, cant be that much heavier then the bt's with the expansion chamber. i think this thing will be alot lighter and more sexy too. -------------
[ http://kurieitaa.googlepages.com - My Web Site }-{ http://kurieitaa.googlepages.com/cpbg - My Paintball Guns ] |
Posted By: krazybill1965
Date Posted: 05 May 2008 at 6:25pm
|
you sir are talented, hands down
------------- KrazyBill |
Posted By: Tolgak
Date Posted: 05 May 2008 at 8:54pm
Thou hast NOT thy right to highlight my initials in thy name... nor dost thou the necessary permissions to useth my avatar. BE GONE, IMPOSTOR!!! ------------- 
|
Posted By: JP8290
Date Posted: 08 May 2008 at 6:30pm
|
this is the best gun i have seen in a long time. your crafesmenship is
seconed to none. keep up the great work. |
Posted By: Ozwarg
Date Posted: 13 May 2008 at 10:16am
|
holy hell, that thing is only set at 180psi? heh. I like your comment. "Do paintball snipers exist? NO, but this is as close as it comes." just a ball park figure, how much did this all cost you with supplies/man hours? ------------- 
|
Posted By: reclusivetorrid
Date Posted: 13 May 2008 at 3:35pm
|
That is not something I would consider to be a "modification".
You build a new gun my friend! Amazing, That hands down is the coolest thing I have ever seen anybody do on this forum with the exception of an old forum member and member of OMHW that goes by the name of engineer. Keep it up, truly awe inspiring ------------- 
|
Posted By: thejudge
Date Posted: 13 May 2008 at 6:32pm
|
not sure if you want to answer this one but 1, where did you get the aluminum, 2 how much does a chunk of aluminum say 18"x2"x6" cost? and finally where do you find a mill to do said aluminum work? ------------- Stay low, run fast, and hope that paintball doesn't hit your... http://www.deltasquad.info/">
|
Posted By: Cl0nE
Date Posted: 13 May 2008 at 9:14pm
|
Ozwarg, i lost count on the hours a Loooong time ago, the cost wasnt so bad though, the parts only add up to a couple hundred, it's the work involved.
Judge, I get my aluminum local pretty cheap, there are places on line you can grab it if you cant find anything around you. Thats a hefty chuck of Al. What are you planning to do with that? :) It would cost you around a hundred bucks online, plus about 20lbs worth of shipping charges. Getting a mill all depends on budget and what size your work will be, you can pick up a cheapie at harbor freight for around $450 right now, next size up is about 1k, but well worth the extra coin. I would suggest getting one from grizzly if your going the bench top route, a little more coin but better service, fit, finish etc,. ------------- http://www.hogsden.net"> |
Posted By: oldpbnoob
Date Posted: 14 May 2008 at 11:45am
|
I thought I saw a link to where you explained how to make the grips you use, but can't seem to find it again. What type of rubber do you use for the handguards/grips? Is it an off the shelf product? ------------- "When I grow up I want to marry a rich man and live in a condor next to the beach" -- My 7yr old daughter. |
Posted By: Kiittyy
Date Posted: 14 May 2008 at 3:24pm
|
I envy your milling skills. It looks pretty heavy though, not to mention a little hard to carry around in the woods for a few hours. Looks great though! ------------- GT Army. 
|
Posted By: Cl0nE
Date Posted: 15 May 2008 at 8:17pm
The rubber i use is a basic 2 part urethane, you can get it at most of the mold supply shoppes try smooth-on, they have pretty wide selection. They run about $100 a gallon and up. The old punisher post on spec-ops had all the mold making info, but all the pics were deleted from putfile. Maybe i'll do up another "How-to" Heres my new "08" version, the new grips are a solid one peice design, and fit the X7 and A5 :) just finished the molds and started shipping the grips a few days ago:)... Sorry about the crappy pics, 
 ------------- http://www.hogsden.net"> |
Posted By: kurieitaa
Date Posted: 15 May 2008 at 10:12pm
|
that is some nice beefy grips. -------------
[ http://kurieitaa.googlepages.com - My Web Site }-{ http://kurieitaa.googlepages.com/cpbg - My Paintball Guns ] |
Posted By: ¤ Råp¡Ð F¡rè ¤
Date Posted: 16 May 2008 at 12:21am
|
Wow, your work is incredible. Keep it up and keep us posted.
------------- 
|
Posted By: oldpbnoob
Date Posted: 16 May 2008 at 10:42pm
I really like the grips, too bad i am looking for something to fit a 98. If you ever branch out.... At $100/gallon, I think I will have to make do.  ------------- "When I grow up I want to marry a rich man and live in a condor next to the beach" -- My 7yr old daughter. |
Posted By: kurieitaa
Date Posted: 18 May 2008 at 7:11am
|
hey Cl0nE. how come your BakeM0n0 and Punisher guns arent on the site in gallery index? they should be, they were allso really good. -------------
[ http://kurieitaa.googlepages.com - My Web Site }-{ http://kurieitaa.googlepages.com/cpbg - My Paintball Guns ] |
Posted By: xr80fan
Date Posted: 22 May 2008 at 10:23pm
|
Dude I just wante to say your extremely talented and that you gun is awsome Every one can tell you put your heart and sole into them and i noticed you had a web site as your sig and i saw you had all the guns your tricked out and was wondering if you mod them for a living or if you just do it as a hobby?
Best paintball gun ive ever seen, Xr80fan |
Posted By: unvolution
Date Posted: 22 May 2008 at 11:10pm
| i nominate a cl0ne mod page... simply for seeing all the stuff he builds right under the link for marker gallery... mayb a sticky that he can post his stuff on.... |
Posted By: xr80fan
Date Posted: 23 May 2008 at 2:16pm
|
I agree With you |
Posted By: Pariel
Date Posted: 31 May 2008 at 11:51am
|
Very impressive.
How many dozens of hours have you put into it, would you say? I'm gonna go out on a limb here and guess that you have some machine experience--what do you do? |
Posted By: Kingtiger
Date Posted: 02 June 2008 at 4:56am
| I am jealous of the lucky person who gets this beast! |
Posted By: benttwig33
Date Posted: 08 June 2008 at 9:43pm
|
holy crap.
it makes me want to get stuff and mill just for the hell of it. ------------- Sig is WAY too big. |
Posted By: Gasdrinker
Date Posted: 11 June 2008 at 1:24pm
|
So what is the total weight of that behemoth
------------- Tippmann A-5/Zeus G1 E-Grip /w APE board QEV Vortex Flatline Dye UL 14 in. R5 Hopper Lapco offset rail with Tac Light/Scope OpsGear MP5 Sliding Stock OpsGear MP5 Mag kit SpecOps Front grip |
Posted By: mitchell_a_ok
Date Posted: 15 June 2008 at 4:48pm
yo what does that thing fire? crap! you could probably fire nerf balls out of it! geez... i am stunned!
|
Posted By: johnc
Date Posted: 03 August 2008 at 1:56am
|
jesus wept.. ------------- At first I couldnt think of anything better to do, and now I cant think of anything eles.. |
Posted By: Ace_Of_Spades
Date Posted: 03 August 2008 at 3:16am
|
way to bring this back from the pit, now i have to drool all over again thanks to you -------------
J. Thompson #5150- http://www.pbnation.com/showthread.php?t=2945831 - Happiness Is A Tupperware Fed Weapon |
Posted By: SSOK
Date Posted: 03 August 2008 at 1:38pm
|
fixed -------------
|
Posted By: XDG SCORPION
Date Posted: 03 August 2008 at 1:58pm
|
Cl0ne, it looks good and all but how heavy is it? ------------- 
|
Posted By: briand236
Date Posted: 07 August 2008 at 10:55pm
| This is the 50' call sniper rifle in the movie Shooter! Keep up the good work, man! Even though the gun is not finished but it looks awesome already! |
Posted By: Styro Folme
Date Posted: 08 August 2008 at 5:25am
|
Even though this thread was bumped, the kid has good taste. Clone/hog has always done amazing work. |
Posted By: Robotech
Date Posted: 08 August 2008 at 1:42pm
|
I would have missed this fine piece of work without the bump so thank you. That thing is just...damn... ------------- New to the sport? http://www.b17queenofthesky.com/paintball/index.html"> 
Proud owner of a WS-66 A-5 ACP |