Trouble with Remote slide check
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=176596
Printed Date: 02 December 2025 at 8:20pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Trouble with Remote slide check
Posted By: Metal Neck
Subject: Trouble with Remote slide check
Date Posted: 01 July 2008 at 4:19pm
|
At least once a day of play, my remote hose (usually at the worst time) releases from the marker and flails around while hissing "Shoot in this direction!" When I connect the coupler, I give it a good tug to make sure of its connection. The fitting on my X-7 in in good condition. It would happen to my other markers too so I ended up replacing the fitting on the markers with same results. When it bursts off it leaves the O-ring on the marker coupling. It usually happens after a couple of hours of play. Suggestions?
------------- Active player since 1984! |
Replies:
Posted By: The Guy
Date Posted: 01 July 2008 at 8:30pm
|
Get a new QD, one of the bearings is probly missing. And slide cecks are crap.
------------- http://www.anomationanodizing.com - My Site 
|
Posted By: uno187
Date Posted: 05 July 2008 at 10:02am
|
slide checks are not crap they make it easier to disconnect your gun with out taking the tank off your back. or having a second person turn your tank off or you. The Guy is right it is more than likelya missing bearing in the quick disconnect. your can buy just the female nipple end for it and replace just that and everything else will still work with the new one. ------------- 98 Custom Pro E-grip cp reg cp on/off custom drop freak barrel kit Ricochet Apache 68/4500 crossfire fang trigger macro line low pressure kit |