A5 Trigger Problems
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=176974
Printed Date: 08 December 2025 at 5:09pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: A5 Trigger Problems
Posted By: ghost8786
Subject: A5 Trigger Problems
Date Posted: 20 July 2008 at 12:35am
|
I just recieved my new rear bolt and sear for my A5. I got everything replaced but now when I pull the trigger the bolt does not go foward, it just sits there. After pulling the gun apart 5 or 6 times I finally realized that when I pull the trigger, it is not pushing the sear down, which in turn would release the bolt. I have no idea how to correct the problem. The metal bracket looking thing on the trigger appears to not be long enough to engage the sear like it should. Any help or suggestions would be greatly appreciated.
|
Replies:
Posted By: K Hop
Date Posted: 20 July 2008 at 8:53am
with the gun disasembled the trigger will not engage the sear. because the trigger assembly needs pressure on the back of the sear to push the sear forward (pressure is provided by the bolt when it is latched on the sear) when the sear is pressed forward the trigger can then engage the sear. there was just recently a problem like this, the problem was that the guide pin was put back in wrong. check the guide pin and any other aspects of the bolt assembly.
|
|