t98 custom platinum response trigger prob
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=178417
Printed Date: 26 April 2026 at 6:07pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: t98 custom platinum response trigger prob
Posted By: djtail
Subject: t98 custom platinum response trigger prob
Date Posted: 13 October 2008 at 12:59pm
hi i have a tippmann 98 custom platinum. i have a response trigger and cyclone feed system on this, the problem is that the response trigger don't work, i have tryed to tuned it but nothing, if i screw the tune all in to the bottom i got stiffy trigger, but when i do screw it out again nothing happens. tried to lube the cylinder but nothing. anybody knows what to do?
-------------
mess with the best die like the rest
|
Replies:
Posted By: mechanikmike
Date Posted: 13 October 2008 at 8:18pm
how much are you backing the screw out at a time? how hard are you
pulling the trigger? do you have a double trigger or a single trigger? first off
if you have a double trigger only pull on the top half, and then only pull
gently enough to trip the seer, and finally after you set the adjuster screw in
all the way only back the screw out about an 1/8th or 1/10th turn at a time,
I know it's gonna take a lot of time but eventually it will start to double fire
or burst fire then only turn it a fraction of a turn at a time if you start to lose
the burst fire you're either going the wrong way or you're turning it in too
big an increment at a time, if all else fails most shops will tune it in quick
for you, good luck
|
Posted By: djtail
Date Posted: 14 October 2008 at 10:31am
okey, here's the deal, i have had a response trigger in a year earlier... but the i had it in a regulary t98. now when i changed to the platinum a bought a new rt and installed. i have a single trigger. the problem is that the trigger gets stiffy, but the only thing that happens when u try to adjust is that u can shoot again and the trigger don't are stiffy. nothing happens with the bolt that should come out and react on the trigger. it's completley dead..
-------------
mess with the best die like the rest
|
|