Cylone Banjo Screws Help
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=179192
Printed Date: 10 July 2026 at 4:05pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Cylone Banjo Screws Help
Posted By: nightmarez
Subject: Cylone Banjo Screws Help
Date Posted: 05 December 2008 at 10:23am
|
So I'm taking about the cyclone for the x7 and need help. The banjo fitting that is connected to the marker and cyclone; does the screws have to be aligned with the air hole in order for the cylone to work? If so please tell me a way to aligned it b/c its kind of difficult. |
Replies:
Posted By: TinMan
Date Posted: 05 December 2008 at 5:23pm
|
No. The screw allows air to pass through no matter the slot position, |
Posted By: The Guy
Date Posted: 06 December 2008 at 1:17am
|
you would never get a good seal and get them aligned. It would be really difficult to tap that way. It would also eliminate the point of the banjo fitting ------------- http://www.anomationanodizing.com - My Site 
|
Posted By: Enos Shenk
Date Posted: 06 December 2008 at 2:14am
|
The trick to those screws is only tighten them so much. If you keep turning the screwdriver and see the bottom o-ring deforming out of the fitting, its too tight.
------------- 
|