i want to mod the a5 into a reverse format where the cyclone will be on the left and the cocking handle on the right or even make it a rear cocking gun any ideas? the area where the cocking handle is now pressureised?

if this is in the wrong section im quite sorry

well i got some free time.....9 and a half months....so it came up because im begining to hate my cyclone as buggy and money pitish as it is..... but does anyone know if its pressureised?

like this and if it doesnt work right sorry...

i thought of that a few times, it's a matter of clone'ing the parts to be on the left, lots of mold work.

but the cocling handel to the back....that i dont know if it will work.

From what I am looking at, switching the sides for the Cyclone would be a matter of milling out a hole on the left side and switching it. Of course the lever is going to stick forwards and you are going to have to run a longer 1/8" line from the right side to the left unless you have some really good milling skills and can swap the mounting, but then you are looking at having to modify the powertube to have an outlet on the left side.

As for moving the cocking lever back, you might be able to use a cocking handle from a 98 and maybe mill out a horizontal slot simliar to the 98 and drill through the rear bolt, aslo similiar to the 98. Not sure how that would work with the rear bolt on the A5. I wonder if you could swap out the rear bolt for a 98 rear bolt?

With enough work, anything can probably be done, but you might want to ask the question..... why? Unless you are a lefty and are trying to move the Cyclone out of your way, there really seems like little reason to put that much work into something just to be different. But then again, I have probably been guilty of this as well.

ya ya ......so im left handed and im gona fix this right handed beast

got a prob with that?