X7 E grip? No contact.
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=179501
Printed Date: 18 December 2025 at 7:52pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X7 E grip? No contact.
Posted By: cowcidile1
Subject: X7 E grip? No contact.
Date Posted: 22 December 2008 at 10:21am
|
My X7 started acting up on me yesterday on the field. It would not switch into automatic so I used it semi with no problems. The light was blinking green and after messing around with the selector (switching modes pushing it up and down) it started firing auto again. Shortly after it started working it stopped firing all together there is no noise when I pull the trigger and the sear doesn't jump but the light in the grip still reacts normally (blinking green pull trigger then yellow release blinking green again) I changed the battery and now it appears to be blinking orange and when I pull the trigger it turns red when the magnet moves through the sensor. Is my sensor messed up? I don't understand how it recognizes the trigger but does not release the actuator. |
Replies:
Posted By: cowcidile1
Date Posted: 22 December 2008 at 10:28am
| I am still messing with it and apparently when I smack the side of the gun it starts working for a few seconds then stops again. |
Posted By: The Guy
Date Posted: 22 December 2008 at 4:41pm
|
sounds like a loose wire or a short. Look carefully at your board for any bare wires. May also be moisture. Expose it to air for a few days, and disconnect the battery. If none of those work, hope its under warranty. ------------- http://www.anomationanodizing.com - My Site 
|