Quick question
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Upgrades and Customizing
Forum Description: Trick it out!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=179503
Printed Date: 07 February 2026 at 6:02pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Quick question
Posted By: blacklabel21
Subject: Quick question
Date Posted: 22 December 2008 at 11:35am
|
I just got a tippmann 98 custom platium digi camo.I have got a e grip with the new ape board,doublem trigger,16 ince jj barrel and a palmers male reg.And i got my 72/3000 hpa tank.My question is on my reg what pressure should i be at.I was guessing about 800 but aint for sure.If you guys could help me on this it would be great. |
Replies:
Posted By: The Guy
Date Posted: 22 December 2008 at 4:44pm
|
If you set your palmer to 800 PSI, it is doing nothing. The tank regulator on your HPA should be preset to that. If you are running no other accessories like an R/T, or cyclone, then you can change the regulator setting. Tun the velocity screw on the side of the gun, all the way out, until its flush with the side of the gun. Then, using a chronograph, you can use the Stab to adjust your velocity. Bring it down a 1/4 turn at a time until you consistently pass the field limit. ------------- http://www.anomationanodizing.com - My Site 
|