Gun Maintenace and Repair - 98c lube without dissassmeble

Print Page | Close Window

98c lube without dissassmeble

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=179655
Printed Date: 31 July 2026 at 5:11pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: 98c lube without dissassmeble

Posted By: Pauldave
Subject: 98c lube without dissassmeble
Date Posted: 03 January 2009 at 5:36pm

I am pretty sure there is a place i put oil in the gun then shoot the air through it, without disassembling, but i dont know where to put the oil. Please help.

thank you

Replies:

Posted By: Mr.Awesome
Date Posted: 03 January 2009 at 6:44pm

take off your barrel. put 2 drops of oil into the asa (air source adapter) the place where u thread the bottle into. then gas up. fire 20 times. then you are good to go.

have fun

Posted By: oldpbnoob
Date Posted: 03 January 2009 at 9:09pm

Mr.Awesome wrote:

take off your barrel. put 2 drops of oil into the asa (air source adapter) the place where u thread the bottle into. then gas up. fire 20 times. then you are good to go.

have fun

Don't forget to put the barrel back on. The reason for taking it off it to not get oil in the barrel as it will do interesting things to the trajectory of the ball.

-------------
"When I grow up I want to marry a rich man and live in a condor next to the beach" -- My 7yr old daughter.

Posted By: derwood
Date Posted: 31 January 2009 at 8:44pm

Also take the feed neck off and put a few drops on the front bolt, then a few drops on the rear bold oring and rear bolt.

Posted By: ctchofday
Date Posted: 31 January 2009 at 11:38pm

derwood wrote:

Also take the feed neck off and put a few drops on the front bolt, then a few drops on the rear bold oring and rear bolt.

not on the front bolt? that will get oil in the breech and on the paintballs... not good

-------------
Xbl:PhantomReign97

'99 Snpr II, ½d Karni, E-Orracle, 2k4 Spstk, 2k5 Prstk, PMR SE, A5, 98

Posted By: Mack
Date Posted: 01 February 2009 at 3:04am

ctchofday wrote:

derwood wrote:

Also take the feed neck off and put a few drops on the front bolt, then a few drops on the rear bold oring and rear bolt.

not on the front bolt? that will get oil in the breech and on the paintballs... not good

derwood's like 0 for 2 in the advice giving business so far.

-------------

Posted By: Orpackrat
Date Posted: 01 February 2009 at 3:41am

Besides putting oil in the ASA, I also put some oil in the cocking rod slide to cover the hammer and with the barrel off pour some oil around and in the front bolt. I then hang it up (barrel pointing up) and let the oil flow though the gun.

Posted By: S\/\/4T-L()G4N
Date Posted: 06 February 2009 at 2:11pm

Mack wrote:

ctchofday wrote:

derwood wrote:

Also take the feed neck off and put a few drops on the front bolt, then a few drops on the rear bold oring and rear bolt.

not on the front bolt? that will get oil in the breech and on the paintballs... not good

derwood's like 0 for 2 in the advice giving business so far.

Actually he isn't 100% wrong. If you are too lazy to disassemble your gun and clean and lube it right, its pretty wise to take the feed neck off and lube the front bolt O-RING. Shooting oil through the ASA won't get this particular o-ring. If this front bolt o-ring is not lubed, it may shrivel up and cause a leak when you shoot. Although this isn't detrimental to performance, it may cause blow back into the hopper which could cause feeding problems without a force fed hopper.

-------------