A5 Internals Won’t Come Out
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=179669
Printed Date: 19 December 2025 at 6:02am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: A5 Internals Won’t Come Out
Posted By: sixstringzz
Subject: A5 Internals Won’t Come Out
Date Posted: 04 January 2009 at 12:54am
| I just bought an A5 a couple weeks ago and played for the first time yesterday. I heard that it's good to strip the gun down and clean out and oil the internals after every day of play. I took all the push pins out, and the two allen key screws in the front. After removing the handle/trigger and the tombstone latch I went to pop the back cover off and take out the internals but only the first powertube came out. The other one was jammed and even when I pulled on it, it wouldn't move. I tried tightening the velocity screw more, but that did nothing. Is there something I'm missing to remove the other powertube(s)? Thanks. |
Replies:
Posted By: slackerr26
Date Posted: 04 January 2009 at 1:34am
|
did you get the allen head screw by the rear sight and the ones under the grip? ------------- 
|
Posted By: Mack
Date Posted: 04 January 2009 at 12:39pm
|
You should be able to slide the internals out of the back of the marker
after removing the endcap, grip and tombstone adapter. If not, then
loosen the screws mentioned above.
------------- 
|
Posted By: sixstringzz
Date Posted: 04 January 2009 at 1:16pm
|
I think I might have missed the allen screws by the rear sight. I'll try that now. *I tried it and everything came out fine. Thanks! |
Posted By: Falconstar
Date Posted: 31 January 2009 at 8:14am
| ok i got an a5 and tryin to get my barrel in but wont fit. so what do i do |
Posted By: K Hop
Date Posted: 31 January 2009 at 9:01am
|
Falsonstar, starting your own thread in this forum will get many more responses, and help you more. Is it the stock barrel or an aftermarket barrel? If it's aftermarket it must have A-5 threads to fit. |
Posted By: Falconstar
Date Posted: 31 January 2009 at 6:54pm
| ita a aftermarket barrel.Smart parts 20 inch tactical |
Posted By: ctchofday
Date Posted: 31 January 2009 at 11:25pm
dont forget to turn the velocity screw in all the way, it will keep the bolts and valve from moving entirely if its out too far.
its spyder threaded he said in another Topic... dont try to put spyder threaded barrels on non spyder threaded guns. ------------- Xbl:PhantomReign97 
'99 Snpr II, ½d Karni, E-Orracle, 2k4 Spstk, 2k5 Prstk, PMR SE, A5, 98 |
Falconstar wrote: