98C won't seperate
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=180469
Printed Date: 06 April 2026 at 7:48pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: 98C won't seperate
Posted By: hodgepodge
Subject: 98C won't seperate
Date Posted: 22 February 2009 at 10:46pm
|
i just bought a used tippmann 98 custom with a foldable stock, and the mod where the air goes through the foregrip (dont know wat its called b/c im a noob), i was planning to take apart the gun to clean it and maybe polish the internals i took off everything i have to (6 screws, foregrip, gun is not cocked//etc) to open the gun up, but when i try to the two halves will not seperate, wats the deal? why wont they come apart? any suggestions or help would be greatly appreciated |
Replies:
Posted By: oldpbnoob
Date Posted: 23 February 2009 at 12:29pm
|
Did you screw the velocity adjustment screw all the way in? If you don't have a manual for your marker, Check the Tippmann site or go to http://www.tippmannparts.com - www.tippmannparts.com and they have manuals for all Tippy markers. |
Posted By: hodgepodge
Date Posted: 23 February 2009 at 1:00pm
| thanks oldpnoob, i thought i did this before, but i didnt, thanks again for the help |
Posted By: oldpbnoob
Date Posted: 23 February 2009 at 1:06pm
| No problem, glad it helped. |
Posted By: Robby_of_PBH
Date Posted: 23 February 2009 at 2:35pm
| Yea you can't forget about the velocity and also the adapter to which the CO2 connects at the bottom. Actually gets kind of annoying taking all that stuff on sometimes. =/ |
Posted By: Mack
Date Posted: 23 February 2009 at 3:31pm
|
One other thing to check is the big nut on the folding stock that tightens against the back of the marker to keep the stock from rotating. It has to be loosened as well for disassemby.
------------- 
|
Posted By: hodgepodge
Date Posted: 24 February 2009 at 7:43pm
| thanks to everyone for their advice |