Print Page | Close Window

Cyclone Feeder Doesn't Fit

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Upgrades and Customizing
Forum Description: Trick it out!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=180655
Printed Date: 04 February 2026 at 5:56pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: Cyclone Feeder Doesn't Fit
Posted By: PCRYJ
Subject: Cyclone Feeder Doesn't Fit
Date Posted: 05 March 2009 at 1:25am
I recently bought a Tippmann Cyclone Feed System for my 98 Custom Pro ACT/E-Grip.  I screwed the tube in and I slid the pins on the vertical adapter into the gun hopper hinge holes.  The problem came when I tried to click the hopper into place on the front sight.  It won't click into place and there seems to be something preventing it from doing so.  I tried using force and that just resulted in scratches on my gun.  If anyone knows why I can't snap the Cyclone Feed System into place, please feel free to respond.  :)



Replies:
Posted By: paintballplaya7
Date Posted: 05 March 2009 at 4:35am
lol. unscrew the front bolt just barely.... lol classic

-------------
*Custom Pro
*Cyclone feed
*X7 hopper
*M16 Carry Handle
*BT 16 Apex Barrel
*Car Stock
*remote
*camo paint job
*Single point sling
*JT Full Coverage Camo
*realtree RAP4 vest


Posted By: oldpbnoob
Date Posted: 05 March 2009 at 9:14am
Originally posted by paintballplaya7 paintballplaya7 wrote:

lol. unscrew the front bolt just barely.... lol classic
There is a receiver bolt on the left side near the barrel that holds a spring which moves the latch into place to hold the feedneck . If you have this bolt too tight, it does not allow the latch to move properly. Loosen this bolt slightly and it should work.
 
As an FYI, the receiver bolts do not have to be gorilla'd into place. A simple snug tightening will do. Over tightening can actually cause a couple of other issues as well. If you still have your manual, read it and go over some basics. If you don't have one, go to http://www.tippmannparts.com - www.tippmannparts.com and find the one for your marker. Lot's of good info in the manual.


Posted By: PCRYJ
Date Posted: 05 March 2009 at 5:29pm
I already tried doing this but it didn't fix the problem.  The issue I'm having is that the metal latch on the feeder that snaps into the front sight is not reaching far enough over the gun so it can click into place.  I'm trying to push it over but I'm risking breaking the feeder.  Thank you oldpbnoob for the intelligent response by the way.


Posted By: oldpbnoob
Date Posted: 05 March 2009 at 5:45pm
Post a pic, because something doesn't sound right.


Posted By: PCRYJ
Date Posted: 05 March 2009 at 6:00pm
As you can see, the latch on the feeder doesn't go all the way over the gun and therefore won't click into the front sight.
 


Posted By: PCRYJ
Date Posted: 05 March 2009 at 7:43pm
I found the solution.  I shaved some plastic off on the feeder elbow that comes in contact with the side of the gun and now the latch snaps into place.  Thank you for your help.  :)


Posted By: oldpbnoob
Date Posted: 05 March 2009 at 8:15pm
Glad it worked. I have never had a problem with mine fitting.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net