Print Page | Close Window

E trigger issue

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=180759
Printed Date: 22 November 2025 at 2:00pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: E trigger issue
Posted By: madthrak
Subject: E trigger issue
Date Posted: 11 March 2009 at 11:26pm
I recently installed an e trigger in my 98 custom.It shoots fine on semi,but under high rates of fire it remains cocked but won`t fire.You can hear the solanoid clicking,but thats it.i`m using co2 with a remote,exp chamber,and have tried 2 new batteries.I installed it with the original sear spring that came with the marker and the heavier spring that came with the r/t I originally had on it.It only seems to do this after the tank gets cold.Anone else have this issue?



Replies:
Posted By: Robby_of_PBH
Date Posted: 12 March 2009 at 2:42pm
You do have a hopper to feed your paintballs fast enough right?  Because when you say it remains cocked, are we talking fully cocked or about 3/4 to half way cocked?  Because if your hopper can't keep up, it'll either chop balls or the bolt/hammer will get stuck half way.

On another note if that's not the case, I know what can happen with Spyder's sometimes.  Be sure you didn't make any bolts that tighten to gun overly tight (especially the ones near the sear/selenoid).  Sometimes if something's too tight it won't allow it to drop the sear.


Posted By: madthrak
Date Posted: 12 March 2009 at 6:56pm
Ty for the response,I figured out the problem i think.Both of sear springs i used were too heavy for the push rod,so i found a lighter spring and it works perfectly.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net