HE egrip help
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=180876
Printed Date: 21 August 2026 at 1:19am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: HE egrip help
Posted By: paintballer395
Subject: HE egrip help
Date Posted: 19 March 2009 at 2:32am
|
i need help on egrip it doesnt click anymore.
i was just clicking the trigger and going through all the modes. and i was seeing how fast i could go on semi but suddenly the clicking stop. the lights worked but the clicking just stop and idk why but i need help how to fix it.
|
Replies:
Posted By: oldpbnoob
Date Posted: 19 March 2009 at 11:06am
|
Try replacing the battery. |
Posted By: paintballer395
Date Posted: 19 March 2009 at 12:01pm
| i did everything . i changed the battery and still doesnt work. the lights work butt the clicking noise doesnt work |
Posted By: Parts Tech
Date Posted: 19 March 2009 at 1:37pm
| Try to see if it will work with the grip not attached to the gun. You might have the wrong sear spring. |
Posted By: paintballer395
Date Posted: 19 March 2009 at 3:56pm
| the lights still work but the clicking noise doesnt work |
Posted By: TippmannTech
Date Posted: 19 March 2009 at 5:39pm
| Sounds like you have a bad connection in between your board and the solenoid. Take your grip halves apart. Then take your board out and separate the black plastic sleeves. From there check your connection on the solenoid. The solenoid is the big silver piece that looks like a stack of quarters. There are two wires that connect this to the circuit board one maybe broken. |
Posted By: Robby_of_PBH
Date Posted: 19 March 2009 at 7:58pm
| Yea, I'd say disconnect it in whatever way you can and see what happens then. |
Posted By: The Guy
Date Posted: 19 March 2009 at 8:58pm
|
do you still have the sear attached when you are trying it, if there is nothing to push the rod back into the solenoid, then it can't be moved, hence the clicking.
------------- http://www.anomationanodizing.com - My Site 
|