Gun Maintenace and Repair - 98c, stab, rt, hpa

Print Page | Close Window

98c, stab, rt, hpa

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=181041
Printed Date: 14 November 2025 at 2:11pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: 98c, stab, rt, hpa

Posted By: Raycroft
Subject: 98c, stab, rt, hpa
Date Posted: 30 March 2009 at 11:16am

I've searched through the forums for 2 days before posting.

Here's the set-ups: 98 custom (5 years old) & A5; both with Stabilizer and response trigger. I just bought HPA (WORR 50 ci 3000psi), and hooked it to the guns. No RT. They were running on CO2 before with no problems. I did notice last night on the 98 that the gauge on the Stab drops from 800 psi to down to nothing in approx 3 shots from the rt, then it won't reset the trigger. So, the question is, am I causing a problem by running through 2 regulators?

The RT's were never dialed in, they work great on co2. Too many regs or adjustment issue?

Thanks!!

Replies:

Posted By: K Hop
Date Posted: 30 March 2009 at 3:24pm

whats the output on the tank?

Posted By: Raycroft
Date Posted: 30 March 2009 at 4:07pm

according to the WORR, 800 psi; Thanks for the response.

Posted By: Raycroft
Date Posted: 02 April 2009 at 11:00am

anyone? lotsa lookers.

Posted By: malaki
Date Posted: 02 April 2009 at 1:09pm

Don't have a clue. Did you try taking off the Stab and see what happens? I know it would be labor intensive, but if it solves your problem, it will be well worth it. Also, you don't really need the Stab on there if you are shooting HPA from now on. This of course is different if you will be switching between the two.

Posted By: K Hop
Date Posted: 02 April 2009 at 3:25pm

After the problems with HPA did it work afterward again with Co2?

Posted By: oldpbnoob
Date Posted: 02 April 2009 at 3:31pm

I tried using a stabilizer with CO2 on my 98 with RT and had issues. When I followed the instructions, it had me turning the stab so far down that the RT and cylcone basically stopped working. I took the stab off and ended up using on another project, so never go the chance to dial it in further. I would guess to try turning the PSI up a little or perhaps bypassing it to see if you have the same problem.

Wish I could offer more help.