A-5 issues
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=181160
Printed Date: 12 June 2026 at 7:54am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: A-5 issues
Posted By: switchdownn
Subject: A-5 issues
Date Posted: 05 April 2009 at 10:32pm
|
i got a A-5 with a response trigger, drop forward and foldable stock and for some reason i have no pressure at all through the gun, the balls dont fly as far and the cyclone aint turnin, ive been told im missing orings but i dont know which one or if thats even the problem at all, i dont see anywhere where there's an oring missin, help meh plz
|
Replies:
Posted By: oldpbnoob
Date Posted: 05 April 2009 at 10:55pm
|
Go to http://www.tippmannparts.com - www.tippmannparts.com and check their online manual against what you have for o-rings. Did the marker start having issues after you added any of the upgrades? have you tried taking the marker down to stock and seeing if it still does it? One thought is that the hole in the stock that the main spring sits in may be too deep and not pushing the valve open enough. Try putting the stock end cap in and see if that helps. Also, are you actually using a chrono to test, or just eyeballing the FPS?
|
Posted By: malaki
Date Posted: 06 April 2009 at 5:59pm
|
Sounds like you need to get an o-ring rebuild kit. I will assume your tank is full, but if not, that can cause all of those problems.
|
|