Print Page | Close Window

98 Customs No Longer Working

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=181468
Printed Date: 18 March 2026 at 7:44pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: 98 Customs No Longer Working
Posted By: buhju1
Subject: 98 Customs No Longer Working
Date Posted: 27 April 2009 at 7:21pm
My team has two 98 Customs that don't work. The first one leaks out of where the bottom line hose attaches to the chamber. The second one leaks right out the barrel. They are between 2-4 years old, neither have any upgrades or modding except for new barrels, and they were both cleaned and oiled regularly. These are slow but steady leaks. I do not have a paintball store or anything like that within 100 miles of where I live. What can I do to fix these guns?



Replies:
Posted By: TinMan
Date Posted: 27 April 2009 at 9:44pm
Disassemble the marker, remove line from ASA then remove line from valve with a 7/16 wrench. Add teflon tape to the threads and reinstall. Should be tight. Reassemble and air up.
 
Leaking out the barrel is only possible through the CVX valve. try 4 drops of gun oil in the ASA
and shoot it without barrel or paint.
 
Hope that helps.
 
 


Posted By: Nagash1959
Date Posted: 28 April 2009 at 12:10am
Also, the O-rings. strip it down and check em. replace them if they are all messed up. You can order sets online nice and cheap.

-------------
98 Custom
Cyclone
Double E-Trigger
Polished Internals
Freak kit
X-chamber
CP Drop w/On/Off



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net