Upgrades and Customizing - Pro Carbine Modification

Print Page | Close Window

Pro Carbine Modification

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Upgrades and Customizing
Forum Description: Trick it out!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=181908
Printed Date: 10 March 2026 at 7:25pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Pro Carbine Modification

Posted By: chun12
Subject: Pro Carbine Modification
Date Posted: 01 June 2009 at 9:45am

I am a proud Pro-Carbine owner, and I have surfed the net countless times looking for modifications to do that will not permentatley modify the actual marker. One such mod. was for a stock. Many ppl usually buy either tippmann or BT stocks and somehow modify the end to make it fit inside and take the place of the end cap. Well I did not want to do this to the marker. I found another soulution for this mod. I came up with the idea of finding a pice of pvc or piping as a connection piece between the endcap and the stock end. I found one such piece and it fits beautifully. I went to lowes and found a piece of 1 inch wide pipe by 2 inches ($1.69). It fits perfectly, so i glued the stock end to one side and then drilled a hole that matched the size of the hole on the end of the end cap used a bolt and nut to attach the other end the endcap. It looks nice (Pics to come). I also put a new JJ ceramic 14 in. barrel and it looks BA....if there are any other mods I should try please post them. I do not need to use the trigger mod, the trigger is soft enough for my style. I am thinking about a cyclone feed and maybe an e-trigger....when I have time and $. THX

Replies:

Posted By: Stewmeistr
Date Posted: 20 August 2009 at 3:44pm

I modded my prolite a little. lightened internals, polished up inside a little, a double trigger, lighter trigger spring and a Carbon barrel. It'll work. I'd like to see your pics though.
Later,
Rob

-------------
Prolite with 12" Cf barrel.

Posted By: TinMan
Date Posted: 20 August 2009 at 8:06pm

I was very impressed with Enos Shenk's PC, the Response Trigger is tight.

http://www.tippmann.com/forum/wwf77a/forum_posts.asp?TID=182599 - http://www.tippmann.com/forum/wwf77a/forum_posts.asp?TID=182599

If your into milsim more, try making a Thompson. Wood foregrip,

mag, and a custom stock would be sweet. All home made.

Maybe make a pump out of it. The foregrip slides great for that.

Go wild