Help with my E Trigger
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=182215
Printed Date: 10 February 2026 at 2:59pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Help with my E Trigger
Posted By: rrad218
Subject: Help with my E Trigger
Date Posted: 27 June 2009 at 3:31pm
| I have a Custom 98 with E-Trigger and it seems to want to shoot itself even when the safety is on. Please Help |
Replies:
Posted By: NickVanDick
Date Posted: 27 June 2009 at 4:11pm
|
I dont understand. Please clarify more.
-------------  http://www.junglerumble.com/">
|
Posted By: rrad218
Date Posted: 27 June 2009 at 4:19pm
|
I went to clean it up and I noticed a buldge in my grip, When i squezed it the grip it started to fire. Now it just seems to fire by itself. |
Posted By: mr 400
Date Posted: 27 June 2009 at 4:25pm
|
what do you think is causing the bulge? what do you mean it fires by itself? like you pull the trigger and it just starts shooting and won't stop or what? who installed the e-grip? ------------- mr400 |
Posted By: rrad218
Date Posted: 27 June 2009 at 4:29pm
|
i think the buldge is from battery
I pick it up and it just starts firing without pulloing the trigger
The grip came with the gun
|
Posted By: mr 400
Date Posted: 27 June 2009 at 4:40pm
|
you got me without actually seeing the marker up close and personal. i would be concerned that the safety does not work. and just firing by picking it up hhmmmm! that may be an indicator of where the problem COULD be. if the marker was dropped and somehow scrambeled the e-grip board or loosened some wires that could be the problem. if you don't feel confident in grabbing your manuel and having a go at it; send it back. or take it to a a pro shop and have them check it out. hope its under warrenty. tippmann is really good at working with people about this stuff.
peace
------------- mr400 |
Posted By: NickVanDick
Date Posted: 27 June 2009 at 5:35pm
|
Have you take your gun apart? or even just taking a grip off the side to see what is causing the buldge?
------------- http://www.junglerumble.com/">
|
Posted By: rrad218
Date Posted: 27 June 2009 at 5:42pm
| I have, i think its the battery. |
Posted By: 66fergie
Date Posted: 09 July 2009 at 3:14am
|
I just had this when I checked my e-grip. 98 c act/ e trigger, cyclone feeder.
after i replaced a broken magnet, the rod to the sear pin was making contact with the board and shorting across it. this resulted in eratic firing.
my fix was electrical tape on the board. it will wear thru over time though.
hope this helps.
|
Posted By: alphablack
Date Posted: 09 July 2009 at 11:12am
|
If you can't figure It out then send it in to tippmann ------------- Tippmann7tstikearmy www.Tippmann7thstrikearmy.webs.com |
Posted By: TippmannLazEffect
Date Posted: 18 July 2009 at 8:38pm
I believe this is your problem and was actually going to say something similar until i read 66fergies post. I would not use tape since it will leave a sticky residue Some have say get some clear nail polish and lightly put it on the metal between the board and marker etc.. of course remove your - egrip Make sure to not put it on the board noid magnet or rod ------------- 
|
66fergie wrote: