X7 full auto problems.
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=182519
Printed Date: 28 September 2024 at 10:14pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X7 full auto problems.
Posted By: jimler
Subject: X7 full auto problems.
Date Posted: 27 July 2009 at 3:46pm
|
Hi! I have a Tippmann x7 with e-trigger. When I start the e-trigger an pull the trigger I can hear the e-trigger working and I have no problem getting the full auto to work. But when I connect the CO2 itīs impossible to get the full auto to work. I have tried resetting the e-trigger to factory default settings. I have tried to shoot full auto with half a tank and full tank of CO2. Any ideas on whatīs wrong and how to fix it?? Please help. /Jimmy |
Replies:
Posted By: oldpbnoob
Date Posted: 27 July 2009 at 6:11pm
|
Replace the battery. A lot of times the battery is strong enough to push the sear rod up, but not to trip it.. Make sure you replace it with a fresh battery, not one from the 7-11 up the road. |
Posted By: jimler
Date Posted: 28 July 2009 at 1:59am
| I have tried to replace the battery and it still does not work. |
Posted By: oldpbnoob
Date Posted: 28 July 2009 at 8:06am
| Are you cocking the marker prior to trying to fire? |
Posted By: jimler
Date Posted: 28 July 2009 at 9:19am
|
Yes... i can shoot semi fire mode with CO2 connected but i canīt get the full auto going. Itīs really weird.
Iīm gonna try to replace the e-trigger with a friends e-trigger. And see if mine works on his x7 or if his e-trigger works on mine. If mine works on his x7 then I should be able to rule out the e-trigger right?
|
Posted By: oldpbnoob
Date Posted: 28 July 2009 at 9:50am
|
Do any of the other modes work? 3 shot burst etc.? If your works on his marker, than it should eliminate the E-trigger as being the problem. |
Posted By: jimler
Date Posted: 30 July 2009 at 6:39am
|
my e-trigger did not work on my friends x7, his e-trigger did work on mine. So what could be wrong with my e-trigger? |
Posted By: phil_pick
Date Posted: 03 August 2009 at 12:34pm
|
Hey, I am having the same problem on my E grip for my A5. All of the other modes seem to be working but when I go full auto it doesn't shoot. I can hear the noid triggering and the rod moving inside the grip but its not firing. It just clicks. Any help would be greatly appreciated. Phil |
Posted By: Evil Elvis
Date Posted: 03 August 2009 at 8:28pm
|
Hi Welcome to the Forums.
The Tippmann X-7 and A-5 new E grips come with a "Safety" Full Auto. Which means that you have to pull the trigger 3 times quick to engage the Full Auto Mode. This is done to avoid accidental full auto fire. Try pulling the trigger quickly about 3 times then Hold it down on the 3rd Pull. It should engage the Full Auto. Thou I recommend the Hyper mode which is it fires on the Trigger Pull and Release. Doubling your natural ROF and allowing you a more control; of your shot groups, burst and accuracy than holding down the trigger and hosing someone down. ------------- 
|
Posted By: jimler
Date Posted: 11 August 2009 at 2:16am
|
I still have the same problem with my gun, and yes I know I should pull the trigger fast 3 times and hold it down och the third pull.
But I think I have located the problem Is there supposed to be a magnet or something in the safety??
Because I tried as a last resort to change the safety with my friend and then the e-grip worked again. Does someone have a picture where I can se where the magnet is supposed to be on the safety and where the magnet is in the trigger?? |
Posted By: rambukk
Date Posted: 25 February 2010 at 9:58am
| is there any whay i can get rid of the three trigger pulls before full auto |
Posted By: oldpbnoob
Date Posted: 25 February 2010 at 9:59am
------------- "When I grow up I want to marry a rich man and live in a condor next to the beach" -- My 7yr old daughter. |
rambukk wrote:Posted By: rambukk
Date Posted: 25 February 2010 at 10:01am
| ok. |