Some input needed
Printed From: Tippmann Paintball
Category: Tippmann Paintball
Forum Name: Marker Gallery
Forum Description: Show us your guns!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=182581
Printed Date: 12 July 2025 at 1:09am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Some input needed
Posted By: TinMan
Subject: Some input needed
Date Posted: 03 August 2009 at 6:03pm
|
My new 98 project marker with dust green CP accessories.
The body is photoshopped Green over Silver.
In your opinion:
Would Silver over green (with a silver trigger) be better than
the Green over Silver (with a green trigger) in the image?
(also have a stainless screw kit, so silver screws)
 Thanks for any input
|
Replies:
Posted By: Mack
Date Posted: 03 August 2009 at 6:23pm
|
I like the current appearance because of the contrast between the barrel back and body. (The "98 CUSTOM" should be silver as well.)
------------- 
|
Posted By: panhead4411
Date Posted: 03 August 2009 at 7:09pm
| ditto |
Posted By: oldpbnoob
Date Posted: 03 August 2009 at 7:38pm
| How about Green on the top and bottom with the raised center area silver? It would flow into the barrel better. Personally, I would mill the center part smooth as well, but considering you are probably trying to prove the point with the name probably a no no. |
Posted By: TinMan
Date Posted: 03 August 2009 at 7:53pm
|
That's a thought. I'll photoshop that and see how it looks. Thank you.
The Tippmann doesn't necessarily have to stay, but I like the silver on green.
|
Posted By: oldpbnoob
Date Posted: 03 August 2009 at 8:13pm
|
Viceversa, if you got a green back, you could paint the mid green and the top and bottom silver. If you did clean work, you could actually put a decent polish on it. This would also allow you to mill and fill the mid section as it would be painted. |
Posted By: ctchofday
Date Posted: 03 August 2009 at 8:55pm
|
green over silver.
------------- Xbl:PhantomReign97 
'99 Snpr II, ½d Karni, E-Orracle, 2k4 Spstk, 2k5 Prstk, PMR SE, A5, 98 |
Posted By: Mack
Date Posted: 03 August 2009 at 8:56pm
Some people just have to be different. -------------
|
oldpbnoob wrote:Posted By: oldpbnoob
Date Posted: 03 August 2009 at 9:28pm
| ^^^^ If you hadn't noticed, I am a bit partial to polished markers. |
Posted By: sinisterNorth
Date Posted: 03 August 2009 at 10:14pm
------------- Pumpker'd; (V.) When a pump player runs up and shoots you at point blank range because you thought 20bps made you good. |
Posted By: TinMan
Date Posted: 03 August 2009 at 10:53pm
The silver and green will be powder coating. I polished some of the inside
and it won't come close to the silver back so I'm not going to go that route.
The image should have a Silver CP gas through where the reg is, and the reg
directly in front of it. Maybe even canted ala cocker. The lp chamber just doesn't work.
|
Posted By: oldpbnoob
Date Posted: 13 August 2009 at 9:32am
| Is this going to be E-bolted? |
Posted By: TinMan
Date Posted: 13 August 2009 at 10:31am
|
It's a blow forward valve using an ebolt ram. My design aside from the PB ram. The lp chamber is not needed now. I'll post pics next week when the parts are done. |
Posted By: oldpbnoob
Date Posted: 13 August 2009 at 11:32am
| Ahh. Just curious. I started working on my Ebolt project last week. Still grinding and filling the body. Will post up some pics soon. Kinda going for a Milsimy look. Hopefully, it'll turn out decent. |
Posted By: TinMan
Date Posted: 13 August 2009 at 11:58am
| Remember my offer olpbn. |