Response Trigger Trouble
Printed From: Tippmann Paintball
Category: Tippmann Paintball
Forum Name: New Player Forum
Forum Description: New to the sport? Get Professional Advice Here!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=182687
Printed Date: 11 March 2026 at 11:27pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Response Trigger Trouble
Posted By: $uperm@n_708
Subject: Response Trigger Trouble
Date Posted: 13 August 2009 at 9:25pm
I installed my response trigger today but i cant seem to get it to perform like its supposed to. i turned the flow control all the way in, then slowly back out. while there was some difference in ROF, it was very slight. i do feel it pushing my finger back but its not fast at all. to be honest, i could shoot faster manually. and when i pull the trigger with the same pressure i get varied ROF's.
Can anyone can give me some tips, particularly on "finding the sweet spot.."
also, will upgrading to super R/T help my problem?
-------------
98 Custom Pro Platinum
Response Trigger
DOP Rocket Cock 2
Lapco Bigshot 12" w/Apex Tip
Tippmann Triumph Hopper
HPA 90/4500
Polished Internals
|
Replies:
Posted By: TinMan
Date Posted: 19 August 2009 at 6:52am
Most RT issues I have seen are from interference in the pass through connector.
Remove the RT, use a 1/4 inch drill to clean up the hole in the right shell half.
make sure the inside fitting will pass through the hole. reassemble.
Good luck with it.
|
Posted By: oelfkp
Date Posted: 19 August 2009 at 9:22pm
Not to state the obvious but you do have enough air correct? A lot of response trigger issues come from air issues. Low PSI, hose issues, leaks, etc. Also if the response trigger is used, a little oil around the prong and some gentle love on the prong may help.
-------------
1 Timothy 4:12 - "Don't let anyone look down on you because you are young, but set an example for the believers in speech, in life, in love, in faith and in purity."
|
|