Gun Maintenace and Repair - JCS POWER TUBE

Print Page | Close Window

JCS POWER TUBE

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=183721
Printed Date: 22 February 2026 at 9:38pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: JCS POWER TUBE

Posted By: goders85
Subject: JCS POWER TUBE
Date Posted: 25 November 2009 at 5:49pm

HELO THERE ADVISE PLEASE

IVE INSTALLED A RED HOT JCS POWER TUBE TO MY TIPPMANN A5 AND FOUND THAT IT WORKS FINE BUT, FOR SOME REASON THE CYCLONE SYSTEM WONT SPIN IVE CHEKED THE ORING IN THE MARKER WHICH RESTS ON THE POWER TUBE AND CHECKED THE CHRONO AND BANJO FITTINGS ETC ALL SEEMS IN ORDER.

CHEERS

Replies:

Posted By: TinMan
Date Posted: 25 November 2009 at 6:17pm

Take it out. Sell it. Be happy.

I actually have one here that defies all explanation. I have miced it in all critical

areas and tried it in several different A-5's. It will not advance the Cyclone, and there

is a 15 FPS drop by installing it.

*edit (I was told the later X7 high flow valve, now used in A-5's will not work with the

first generation JCS tube. Luckily I had the first Gen valve in my A-5 as required

and it still didn't work. I tried the later valve with it for S&G's, and it was the same)

There is no good replacement for a stock Tippmann power tube. Keep the stock one.

Posted By: goders85
Date Posted: 25 November 2009 at 6:53pm

CHEERS AND CONSIDER IT DONE!!