Gun Maintenace and Repair - Response trigger

Print Page | Close Window

Response trigger

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=186339
Printed Date: 22 April 2026 at 12:21pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Response trigger

Posted By: immortalfade
Subject: Response trigger
Date Posted: 28 July 2010 at 8:47pm

So i got this used tippman 98 with a cyclone feeder and response trigger. I have read the manual and adjusted the screw and pulled the trigger in all sorts of ways. the cyclone feeder and the response trigger are connected to a 2 way banjo fitting. I have a full tank of co2. No matter how i adjust the screw, i can not get full auto or bust and if i tighten it all the way down the trigger is not hard to pull as the guide describes. I would very much appreciate help especially from someone with experience with a response trigger.

Replies:

Posted By: oldpbnoob
Date Posted: 28 July 2010 at 10:14pm

Is the cyclone feed advancing? Have you checked all the lines for obstructions? Does the marker fire and reset properly?

-------------
"When I grow up I want to marry a rich man and live in a condor next to the beach" -- My 7yr old daughter.

Posted By: immortalfade
Date Posted: 28 July 2010 at 10:30pm

The cyclone feeder advances with every pull of the trigger and appears to be working fine. It fires and resets, that is, it recocks back in place to be fired again as it should. however, the piston from the RT doesnt extend to reach the trigger