X7 select fire egrip misfire
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=186378
Printed Date: 22 December 2025 at 7:22am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X7 select fire egrip misfire
Posted By: Matt s
Subject: X7 select fire egrip misfire
Date Posted: 01 August 2010 at 6:10am
|
Guys I have a bit of an issue with the above
Been fitted to my x7 for 6 months and suddenly it's started to misfire. For every 10 trigger pulls 5 are not doing anything. It happens in all modes. I have stripped and rebuilt the marker as well as the egrip but still no good. The sear looks good and when not connected to the marker the grip works 100%. 10 out of 10 pulls. I'm wondering if it's the hammer that's the problem? All help very much appreciated |
Replies:
Posted By: Mack
Date Posted: 01 August 2010 at 10:12am
|
Try a different (new) battery. A battery that is starting to go dead can still have enough juice to make the grip sound like it is working but not cause the pin to hit the sear with enough force to trip it.
------------- 
|
Posted By: Matt s
Date Posted: 01 August 2010 at 6:51pm
|
Batt change was the first thing I did. No cure.
I can only think it's the hammer |
Posted By: Matt s
Date Posted: 03 August 2010 at 2:36pm
| Any ideas guy? |
Posted By: FlyByNight
Date Posted: 03 August 2010 at 3:04pm
|
Not sure how much the x7 is like the phenom in this regard, but it sounds exactly like the problem you see when the trigger plug has backed out a bit. Tippmann has a video up about it on youtube - removing the trigger pin, re-tightening the trigger plug, and regreasing/reinserting the trigger pin. |