Tippmann X7 O-Ring Kit
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=187049
Printed Date: 14 April 2026 at 8:09pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Tippmann X7 O-Ring Kit
Posted By: Matt s
Subject: Tippmann X7 O-Ring Kit
Date Posted: 02 November 2010 at 8:31am
|
Guys, I will be replacing the o-rings in my X7 this week after a very frustrating weekend with it. Hopefully, it will fix the remaining issues I have with intermittent air leaks through the barrel and mis-fires.
Anyway. My last replacement kit had o-rings of different colours, which did not help me when replacing them, so I just want confirmation as to what goes where as I am not very clued up on o-ring number sizes.
So first, my X7
 O-Rings
1 - Barrel Adapter
2 - Bolt Tip
3 - Tombstone/Valve (Inside Power Tube)
4 - Not sure on name, but the one in the body around the cyclone output
5 - Back of Valve? (Inside Poser Tube)
6 - Hammer Tip
7 - Back Cap
8 - Micro-line thread into Tombstone
The kit
 I know it may be difficult on photo's but can you match them up for me please? A=1 etc..
Thanks for your help guys.....
|
Replies:
Posted By: JAY
Date Posted: 14 December 2010 at 8:58pm
| if its leaking down down your barel that would most likely be the valve which is inside the black powertube between the front bolt and back bolt, to take it out simply take the velosity screw out all the way and push the valve out with a pencel using the rubber end through the skinny side first and it should pop right out with some force being carefull not to crack the powertube |