Print Page | Close Window

New Phenom Leak

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=187292
Printed Date: 11 April 2026 at 5:24am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: New Phenom Leak
Posted By: Bariani
Subject: New Phenom Leak
Date Posted: 06 December 2010 at 10:28pm

Good night, i was searching for this problem and didnīt find nothing about it.

The problem is:

My phenom is leaking for this hole :


I checked all o-rings and itīs ok (aparently).

Can somebody help me ?

Thanks and iīm sorry about my english. 




Replies:
Posted By: Bariani
Date Posted: 07 December 2010 at 6:48am

If the pressure is about 200 fps, thereīs no leak, but if I increase the pressure, the leak returns. The more I increase the pressure, the greater leakage.

I donīt know what i do Frown

Please, help me... lol Frown 




Posted By: X7MAN
Date Posted: 10 December 2010 at 8:53am
Hey,

If you have the manual with the diagram of the flex valve, I would take the valve apart and check the oring inside of the valve. Also check the other parts in the valve to see if they are broken. 

                                                                     Mike


-------------
DON'T FIX IT IF IT ISN'T BROKEN!



Posted By: Evil Elvis
Date Posted: 10 December 2010 at 12:34pm
did you check out the Phenom videos on youtube from Tippmann?


%20 - http://www.youtube.com/user/TippmannSports
check the phenom videos they should walk you through most problems. X7OG.net is also a great resourse.

-------------


Posted By: Evil Elvis
Date Posted: 10 December 2010 at 12:36pm
%20 - http://www.youtube.com/watch?v=H3yPrLDNFR0

-------------


Posted By: Santa Claws
Date Posted: 23 December 2010 at 8:42am
there is another guy with the same problem on this forum, he says that his o rings get messed up and then it starts leaking. i think that you should call customer support and ask them what to do. Who knows?
mebbe its just a problem with a loose screw. I am guessing that if you call them and tell them about it they will give you a new gun or c02 cartridge
-santaClown


-------------
What do you want for christmas little one?


Posted By: awilli23
Date Posted: 27 December 2010 at 5:55pm
check here http://www.tippmann.com/pdfs/manuals/X7_Phenom_9-7-10.pdf
I think you'll find that your o ring is chipped on number 63
if not lube and reassemble.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net