Trigger problem
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=187492
Printed Date: 22 December 2025 at 7:03am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Trigger problem
Posted By: CarterMD
Subject: Trigger problem
Date Posted: 07 January 2011 at 6:13pm
Hi,
got some crazy problem with my brand new Phenom, maybe you can help me.
Note: No Air/CO2 connected, just electronics activated !
1.) I put the selector swith to FA (Full-Auto, Mode 2)
2.) I pull the trigger three times and it start in full-auto, perfect
Now, let's say I push the trigger not exactly to the back, I pull it slight to the left and the marker stops firing, moving it back to the right it will start firing again.
Maybe someone can help me ? Thanks !
|
Replies:
Posted By: Uber J
Date Posted: 10 January 2011 at 3:14pm
|
It is something to do with your magnetic sensors. the easiest thing to do would be stop pulling the trigger at an angle, but seeing as thats not a permanent fix you will need to realign your board sensors. inside the grip frame is the board and within the two black "guards" protecting the board are three sensors. the single one (closest to the solenoid) is your safety/selector sensor, that one seems fine seeing you can shoot different modes. the two in front (face of the board) is the trigger sensors, every time the trigger magnet passes between these two the marker fires. what i am guessing is one or both of these are out of whack. ideally they should be equal distance apart from each other pushed up against their "guards". just be careful when adjusting these as they can be snapped off or damaged. if that fails contact tippmanns service center directly.
|
|