Print Page | Close Window

Low Velocity on my 98C

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=187926
Printed Date: 18 April 2026 at 12:48pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: Low Velocity on my 98C
Posted By: universalcode
Subject: Low Velocity on my 98C
Date Posted: 14 March 2011 at 8:26am
I'm running compressed air on my 98 Custom. My only add-on is a Cyclone Feed. Yesterday, I couldn't get the gun to shoot above 200fps. Even with the velocity adjuster all the way out, the gun shot right around 200fps consistently.  Any thoughts?

-------------
_________

If you're looking for the guilty you need only look into a mirror.



Replies:
Posted By: Ceesman762
Date Posted: 14 March 2011 at 12:20pm
Did this happen when you added the cyclone? When was the last time you cleaned and oiled it?  

-------------
Innocence proves nothing
FUAC!!!!!




Posted By: universalcode
Date Posted: 14 March 2011 at 12:27pm
It's a new gun, first time I chrono'd it. I did take it apart to polish the internals. Oiled it thoroughly. I'm pretty meticulous about putting everything back together properly. Any chance I over-tightened a bolt or screw anywhere?

-------------
_________

If you're looking for the guilty you need only look into a mirror.


Posted By: Ceesman762
Date Posted: 14 March 2011 at 12:31pm
Just where did you polish it?

-------------
Innocence proves nothing
FUAC!!!!!




Posted By: universalcode
Date Posted: 14 March 2011 at 9:22pm
pretty much the entire inside of the gun. i followed an online tutorial and my finished product looked exactly like the pictures.

-------------
_________

If you're looking for the guilty you need only look into a mirror.


Posted By: Ceesman762
Date Posted: 15 March 2011 at 9:11am
Did you polish where the power tube attaches to the right half of the body shell?


-------------
Innocence proves nothing
FUAC!!!!!




Posted By: universalcode
Date Posted: 15 March 2011 at 12:29pm
i only polished where there are moving parts involved. so, front and rear bolt. along the ACT linkage. trigger assembly.

how about this? i think i over-tightened the air hose where it connects to the valve. could this hurt my velocity? i noticed it was a bit off center when putting everything back together. gonna strip it all down again this afternoon.


-------------
_________

If you're looking for the guilty you need only look into a mirror.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net