Custom Pro HELP ME
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=188082
Printed Date: 21 January 2026 at 4:05pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Custom Pro HELP ME
Posted By: enrico556
Subject: Custom Pro HELP ME
Date Posted: 10 April 2011 at 7:56pm
|
I am having a problem with my gun. I have a custom pro and the bolt seems to not be going back all the way. I looked it the gun with the barrel taken off and the bolt is up a little too far just enough to where the paintball cant go through. The only way I can shoot is by manually reloading it or recocking it. I also have a cyclone hopper if that could be the reason why. Everything else works fine except that one problem. ------------- poop |
Replies:
Posted By: Mack
Date Posted: 10 April 2011 at 10:50pm
|
If it has ACT break out the manual and make sure the ACT springs/guide parts are installed in the correct locations. ------------- 
|
Posted By: enrico556
Date Posted: 11 April 2011 at 4:24pm
|
yes they are. Could it be a problem with my CO2 because I was doing some research and found a similar problem that was caused by a bad o-ring or co2 tank ------------- poop |
Posted By: enrico556
Date Posted: 11 April 2011 at 4:50pm
|
I also noticed that the sear seemed like the spring was pushing it back too far. Is that normal if the tip of the sear is resting on the tiny pole? ------------- poop |
Posted By: enrico556
Date Posted: 11 April 2011 at 4:54pm
|
my gun isnt even ACT its an older version ------------- poop |