Carver One Question
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=188166
Printed Date: 16 December 2025 at 1:30pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Carver One Question
Posted By: Dodger_1967
Subject: Carver One Question
Date Posted: 22 April 2011 at 7:32pm
|
Just switched to HPA, noticing my markers FPS is fluctuating roughly 15 FPS up, or Down from the field FPS setting. How do I cure this problem, would like to get it down to within 5FPS travel either way. I am using a Ninja Remote Thanks
|
Replies:
Posted By: Mack
Date Posted: 22 April 2011 at 10:25pm
|
First thing to try is to fire off a string of shots over the chrono and see if the velocity decreases with each shot. Then wait a few minutes and fire off another shot to see if the velocity has gone back up. If this is the case, you might have an airflow restriction that allows a serious decrease in pressure while firing. It could be a problem with the remote or it could be something simple like having the knob turned down too tight. I should also point out that if it a fairly new marker it might not be broken in yet. You should also test with tank on gun to remove the remote from the equation. If the problem still persists, try another HPA tank. When I had a reg go out a few years back I was having a similar issue for a few months before. Of course, if the reg on the tank is new; it might need some break in time too. ------------- 
|