R/T problems with 98C Pro
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=188541
Printed Date: 26 June 2025 at 7:50pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: R/T problems with 98C Pro
Posted By: Zero2505
Subject: R/T problems with 98C Pro
Date Posted: 14 June 2011 at 3:34pm
|
I have a 98C Pro with the A.C.T. Anywho, my problem is that my R/T is not working the way it should. I did lose my spring, thinking that may have been the problem. But I just got my new spring in today. Which I put in thinking it would fix my problem but no good. The problem the R/T is having is that when I turn the valve all the way to start tuning it. It doesn't become super hard like it should, which it is a more semi hard that I can push the trigger half way. Or sometimes it just goes in into a full auto for a few secs, which then, after it is done, normally goes hard like it should. But when I try to turn it, it feels like there is not enough air pushig the trigger back and after it shot once it doesn't push my finger back and I gotta take my finger off the trigger. Another problem is that sometimes when I pull the trigger, it will go into a full auto for a few secs without the need for me to keep holding back the trigger. I did take the R/T off to check all of the o-rings to see if any were damage, but they were all fine. I even use some of my paintball oil and put some on the o-rings hoping that may help it as well. I use extreme Rage paintball oil for that. But no luck. Also I do have the cyclone feeder on my 98C Pro as well, which it works great, I also use C02 which was filled today as well. Thanks in advance. |
Replies:
Posted By: Deltafox
Date Posted: 21 July 2011 at 3:10pm
|
Hi Zero, I've got the 'Auto Fire' Problem. Brand new tippmann 98 PS ACT RT Zen 48Ci bottle 3000psi I played one game and did not shoot more than 50 bals. at the start of the second game i did some test fireing and it went 'full auto' till my bottle was empty (started rateling as if the bottle was empty). I started the game with +-2500 psi in the bottle. The rest of the day i had no problems and RT worked as it shood Yesterdat i went test fireing in a garage and again 'full auto' till empty. Any one got an idea? (excuse me for my bad english. I'm dutch)
|
Posted By: Mack
Date Posted: 24 July 2011 at 10:04am
Couple of things to check:
------------- 
|