Sierra one - maintenance, disassemble and cleaning
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=189539
Printed Date: 26 June 2025 at 12:09pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Sierra one - maintenance, disassemble and cleaning
Posted By: RoachDaReaper
Subject: Sierra one - maintenance, disassemble and cleaning
Date Posted: 26 November 2011 at 8:54pm
|
Greetings, Im new to the forum...
Recently purchased a Sierra One and looking for tutorial videos on maintenance and cleaning. I flipped through YouTube a bit and didnt find anything solid. Not trying to poke and prod with the insides. I just want to keep my gun in tip top shape 
Thanks for your help! |
Replies:
Posted By: Rubbr Chickin
Date Posted: 03 January 2012 at 7:00pm
|
Take the barrel off and run the squeegee through the barrel with a wet cloth/paper towel on the end. Clean out the breach with a wet cloth/towel, and add some oil to the front bolt O-ring. Also put some drops in the rear bolt opening. Taking it apart is obviously the best way to clean it. There are a lot of pins and springs inside, but you can do what I did, and that was put some super glue on the pin ends and put them into the right receiver half, and I also glued the feed latch spring. That way there is less parts flying around druing cleaning/
|
Posted By: Daviddd11
Date Posted: 10 April 2012 at 10:21am
|
I have disassembled my Sierra One, cleaned it, and almost gotten it back together, but I am not quite sure as to how to insert the feedneck spring. If anyone has any idea of how to install it please let me know!! Thanks -David |