New Player Forum - project salvo response trigger

Print Page | Close Window

project salvo response trigger

Printed From: Tippmann Paintball
Category: Tippmann Paintball
Forum Name: New Player Forum
Forum Description: New to the sport? Get Professional Advice Here!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=189763
Printed Date: 30 October 2025 at 4:07pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: project salvo response trigger

Posted By: axlf123
Subject: project salvo response trigger
Date Posted: 04 January 2012 at 7:57pm

ok so i just installed my response triger into my project salvo just as every video online said and as the pictures descripted....i took a c02 tank and hooked it up and fired off a couple shots to see if it would work but it would not shoot automatic......im not sure why its not working, i was thinking because there is not much air at all left in my tank but i dont know.....also would anyone happen to know how to program an intert too halo hopper in like simply

Replies:

Posted By: bc5rm125
Date Posted: 23 January 2012 at 10:21pm

Not to sure but I know my friend was using a tippmann 98 custom pro and his response trigger wouldn't work unless it had 3/4 co2 so it might be because of a low tank, also did you hammer out the pin where you plugged the gasline from the piston into your gun. I'm just guessin since I've never had a response trigger and definitely don't know anything about the halo hopper so I'm probably wrong but good luck.

Posted By: TippmannEmployee1
Date Posted: 30 January 2012 at 3:17pm

I would start with a full tank. Also check for any loose fittings or damaged O-rings in the banjo fittings. Start off with the flow control adjustment turned all the way in. When you pull the trigger it should get very stiff if your RT kit has no leaks. Also watch our video on how to adjust the RT System. http://youtu.be/xGpaIgpOc7E" rel="nofollow -