X7 Phenom problem
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=189893
Printed Date: 14 July 2025 at 12:31am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X7 Phenom problem
Posted By: rek
Subject: X7 Phenom problem
Date Posted: 05 February 2012 at 10:55pm
|
i have like a month with my X7 and today on my first game of day at half game X7 don't shoot well so i have a friend he have an X7 and it have same problem i think become froze something and it doesnt let it shoot well problem on marker shoot 1 2 3 4 paintballs still pulling the trigger sounds like when i pull trigger without Co2 this happen on F and FA i dont know if X7 get froze inside on the valv and not work good with the Co2 or if i need a remote coil to good working with Co2 or what, it's feel cold every part where seen's TIPPMANN next to the X7 phenom hope some one know why or how to solve it |
Replies:
Posted By: TippmannEmployee1
Date Posted: 06 February 2012 at 10:39am
|
It's best to use compressed air with a X7
Phenom. It will operate on cO2 but it needs to be set up correctly & relatively
warm where you are playing. If I had to use cO2, I would use a remote-line
& only shot it in semi-auto. Rapid firing will cause the cO2 to chill the
tank & marker down & allow liquid cO2 to transfer out of your tank and
into the marker. This will reduce performance. I hope this helps. |
Posted By: Mack
Date Posted: 06 February 2012 at 11:20am
|
If you have to play in the cold with co2 you can run the remote and keep the bottle under your coat. A word of warning . . . I've done this, because I had too, but it wasn't a lot of fun in the winter.
------------- 
|
Posted By: rek
Date Posted: 07 February 2012 at 10:11am
|
Thank You guys yesterday early i move my self to get a remote he is not cold that much but is
wet weather a little so will work with a remote line i try yesterday FA and F work great maker doesnt feel froze anymore Thax for support |