My MAGFED Tippmanns
Printed From: Tippmann Paintball
Category: Tippmann Paintball
Forum Name: Marker Gallery
Forum Description: Show us your guns!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=189919
Printed Date: 22 December 2024 at 4:00pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: My MAGFED Tippmanns
Posted By: Evil Elvis
Subject: My MAGFED Tippmanns
Date Posted: 11 February 2012 at 9:32am
 Ok yesterday got my Tank filled and this is a craptastic iPhone video of the 3 of the first 4 mags i shot through the Tacamo kit. The First Mag i used to Chrono. She's shooting at 283-285 steady on HPA. Shooting Valken Infinity (because of the ticker shell it's the paint used. per Doug Brown's advise on thicker shelled paint). I can say that I had 3 breaks in my Apex tip. I'm not sure if my ramp is jacked or if I need to upgrade to an apex2 but I might eliminate the Apex all together. I dont have the Paint to Experiment with Settings and Range. I had zero Mag breaks and Zero breach chops. I fired one clip on Mechanical Semi and two in Electronic "Hyper" mode with fires on Trigger Pull and Trigger release. Being MagFed i didnt want to blow my clip in one pull. But I wanted to double my ROF if needed a fair balance between Ammo/ROF. Here is a link to a video I posted on Facebook. https://www.facebook.com/video/video.php?v=3231263590270&oid=127645857317630" rel="nofollow - https://www.facebook.com/video/video.php?v=3231263590270&oid=127645857317630 ------------- 
|
Replies:
Posted By: The Guy
Date Posted: 11 February 2012 at 11:43pm
|
Very nice. I played Tippmann World Challenge with a Tacamo kit. I was questioned many times if I was on the right team. Did you pre-order? ------------- http://www.anomationanodizing.com - My Site 
|
Posted By: God
Date Posted: 12 February 2012 at 3:54pm
| Hmmm. I'll have to order some of these and give it a try. |
Posted By: tallen702
Date Posted: 08 March 2012 at 10:14pm
| I go through waaaay too much paint to every use one of those systems effectively. |
Posted By: Evil Elvis
Date Posted: 12 March 2012 at 11:46pm
You get better fast. I was playing pistol primary half of last year. I gotten better and better each game now that every single shot counts. I went from about 2000 rds a game to about a bag plus. -------------
|
tallen702 wrote:Posted By: ChEwYY$$
Date Posted: 13 March 2012 at 1:46am
| Nice! How reliable is the TPX? |
Posted By: Evil Elvis
Date Posted: 15 March 2012 at 9:25pm
|
It has yet to let me down. But you got to learn air & paint management after your 3rd mag switch your air. -------------
|
Posted By: oldpbnoob
Date Posted: 16 March 2012 at 9:31am
|
Are the Tacamo kits the same as Rap4? I have heard some serious complaints of the Rap4 kits fitting terribly and becoming blenders. ------------- "When I grow up I want to marry a rich man and live in a condor next to the beach" -- My 7yr old daughter. |
Posted By: Mack
Date Posted: 16 March 2012 at 9:38am
|
Can't answer your question but I have read in a couple of places that either RAP or Tacomo had problems with an overseas supplier. Specifically, the kits didn't meet their specifications and after the kits were returned to the overseas supplier for refund they somehow started showing up on places like e-bay.
------------- 
|
Posted By: oldpbnoob
Date Posted: 16 March 2012 at 9:50am
|
Gotta love Asian business philosophy. ------------- "When I grow up I want to marry a rich man and live in a condor next to the beach" -- My 7yr old daughter. |
Posted By: Mack
Date Posted: 16 March 2012 at 9:51am
|
Hey, I never mentioned China!
-------------
|
Posted By: oldpbnoob
Date Posted: 16 March 2012 at 10:12am
 And unfortunately, many of them have a very similiar philosophy of "buyer beware". I deal with Asia on a nearly daily basis. Very familiar with how they operate. ------------- "When I grow up I want to marry a rich man and live in a condor next to the beach" -- My 7yr old daughter. |
Posted By: Ceesman762
Date Posted: 16 March 2012 at 10:17am
Many Asian manufacturers do not use/have QC engineers, so no quality control. ------------- Innocence proves nothing FUAC!!!!! |
Posted By: oldpbnoob
Date Posted: 16 March 2012 at 10:32am
|
Not sure if that is necessarily the case, but it seems to be socially acceptable in many regions, especially China, to resell non-spec parts as long as you offer a lower price. There also seems to be an issue with the definition of "new". I.E. picking something out of a trash heap, cleaning it up and remarking it is not new by most of the worlds definition, but not in China. However, it is also not uncommon to have a manufacturer reject parts for QC concerns and then another company buys the rejects as scrap and resells them without advising that they are factory rejects. The burden of making sure the parts are good is always on the buyer. Once the seller has their money, they rarely stand behind the product. ------------- "When I grow up I want to marry a rich man and live in a condor next to the beach" -- My 7yr old daughter. |
Posted By: Lightningbolt
Date Posted: 16 March 2012 at 10:44am
|
This reminds me of a thread a long time ago. Something like "It makes great economic sense for our country to surrender menial jobs like welding bicycle frames to Asia. I eventually used JB Weld to attach my palms to my face because my arms got tired. |
Posted By: oldpbnoob
Date Posted: 16 March 2012 at 10:52am
|
Part of the problem of low quality also stems from the pressure for Asian companies to deliver an inexpensive product. People automatically assume that if they use Asian manufacturers, the production costs will be insanely cheap. However, they fail to take into account that these Asian companies run very lean and on very thin profit margins. There is little room for error, and they will do anything to turn a profit. So, if they produce $100k worth of parts and they are only making $10k or so on them and then the parts get rejected, they will do everything within their power to insure they recoup as much of their money as possible. There seems to be little concern for making it up in the future. The see money lost as money lost and recouping due to later business doesnt enter into the equation. Thus the reason that sooooo many factory rejects and/or inferior parts find their way back into the market. ------------- "When I grow up I want to marry a rich man and live in a condor next to the beach" -- My 7yr old daughter. |
Posted By: God
Date Posted: 16 March 2012 at 2:59pm
| So when I get around to buying some of these magazines, where should I purchase them as to avoid getiing lower quality mags? |
Posted By: Evil Elvis
Date Posted: 16 March 2012 at 3:04pm
|
I got mine throught Rockstar Tactical. The only issue I had RAP4 fixed it free of charge. -------------
|
Posted By: The Guy
Date Posted: 16 March 2012 at 5:42pm
Arabic is also very similar. In fact you are MORE likely to get crap product from them if you are white. ------------- http://www.anomationanodizing.com - My Site
|
Posted By: sairam
Date Posted: 17 April 2013 at 1:16am
| nice information |
Posted By: sandersollie
Date Posted: 22 April 2013 at 8:20am
|
Here is the link to a photo of my Tippman sierra one i put on facebook, can anyone tell me where i can get different magazines that will fit it and also any ideas what else i can add to the gun. thanks :) ------------- S3117 |
Posted By: sandersollie
Date Posted: 22 April 2013 at 8:20am
|
https://www.facebook.com/photo.php?fbid=10152721060130212&set=o.52130920972&type=1&theater" rel="nofollow - https://www.facebook.com/photo.php?fbid=10152721060130212&set=o.52130920972&type=1&theater
------------- S3117 |
Posted By: Parts Tech
Date Posted: 24 April 2013 at 10:16am
|
Tacamo and RAP4 are the same. TippmannParts.com gets these through RAP4 and we try to offer as much service as we can to our customers using them. The kits come in and out of availability and we find un-announced changes in what the kits contain. These kits are pretty much the only option. Players either get great results or have problems with chop. ------------- Tech at http://www.tippmannparts.com" rel="nofollow - TippmannParts.com We do everything Tippmann |