Tippman 98 Custom ACT Bolt Question
Printed From: Tippmann Paintball
Category: Tippmann Paintball
Forum Name: New Player Forum
Forum Description: New to the sport? Get Professional Advice Here!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=190272
Printed Date: 27 April 2026 at 8:15pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Tippman 98 Custom ACT Bolt Question
Posted By: dinnearashvareesh
Subject: Tippman 98 Custom ACT Bolt Question
Date Posted: 25 May 2012 at 9:49pm
| Was working on adding a new stock to my Tippmann 98 Custom ACT and I was wondering if it was possible to change the bolt over to a single spring system while being able to keep the linkage pin attached to the rear bolt? Do I need a different bolt assembly? If so, what do you recommend? The new stock does not have holes for both springs. Any and all help is appreciated. |
Replies:
Posted By: Mack
Date Posted: 26 May 2012 at 10:08am
|
Or, you could measure the size and depth of the hole in the stock end cap and put a similar one in the new stock.
------------- 
|
Posted By: dinnearashvareesh
Date Posted: 26 May 2012 at 11:47am
| Asked someone to do that for me and they messed it up, so that is why I am at this point. But thank you for the input. |
Posted By: TippmannEmployee1
Date Posted: 30 May 2012 at 10:18am
|
The best thing to do in buy a stock that is A.C.T. compatible, all of them are made that way now. If you purchased one that isn't it must be about 5 or 6 years old. You can convert your marker to non A.C.T. buy
swapping out the rear bolt, linkage arm & drive spring with a non A.C.T.
model, but you will be losing a great feature. |