Pressure control screw Pro Carbine
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=190480
Printed Date: 26 June 2025 at 4:13am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Pressure control screw Pro Carbine
Posted By: Grantwood
Subject: Pressure control screw Pro Carbine
Date Posted: 13 August 2012 at 12:18pm
|
I Have been giving a Pro Carbine Pepperball and have found that the velocity screw is missing. Where the screw has to go is just a hole, I see not place for the screw to screw into. I am wondering if there is more missing than just the screw? I use the gun to play paintball and do not want to hurt anyone What is it that I need? Thanks |
Replies:
Posted By: Enos Shenk
Date Posted: 24 August 2012 at 8:09pm
|
Straight from my replacement parts guide stickied at the top, a Pro-Carbine velocity screw is a 7/8" length 1/4-20 bolt. You can find one to fit the bill at pretty much any hardware store. Look for a socket head cap screw and it's exactly the same as the original.
------------- 
|
Posted By: Grantwood
Date Posted: 25 August 2012 at 2:44am
|
Thank you, I also need to find the Tension Spring. Any Ideas? |
Posted By: TippmannEmployee1
Date Posted: 29 August 2012 at 4:49pm
|
If you cannot see the threads for the
adjuster screw, then the powertube needs to be rotated around until it lines up
through the receiver. Just reach in with a small screw driver or Allen wrench
to rotate it. If you can't locate factory parts then a hardware store will do
for the screw & spring. |