Quick question with Carver One
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=190601
Printed Date: 23 December 2024 at 10:28am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Quick question with Carver One
Posted By: liestaylor
Subject: Quick question with Carver One
Date Posted: 19 September 2012 at 10:41pm
| Ok, i know that on most paintball guns, there us a screw you turn to crank up your markers fps. where is this screw on the tippmann carver one????? |
Replies:
Posted By: tallen702
Date Posted: 20 September 2012 at 6:07am
Left side of the marker, just in front of the US Army emblem. Remember, keep it under 300FPS, anything over can break fingers or rupture ears. ------------- <Removed overly wide sig. Tsk, you know better.> |
liestaylor wrote:Posted By: liestaylor
Date Posted: 21 September 2012 at 6:52pm
| what do i use to crank it up? |
Posted By: tallen702
Date Posted: 21 September 2012 at 8:40pm
|
Alright, first off, you need to be using a chronograph to determine exactly what your muzzle velocity is. Just sticking an Allen wrench in there and cranking it up isn't going to do you any good. So, chronograph first, THEN you can start fiddling with the velocity. Once you're at a chrono, simply put the proper sized Allen wrench into the hole and adjust the screw left or right until the proper velocity is achieved. Again, I can't stress enough how important it is to keep your marker UNDER 300FPS. Most fields require a max of 280-290 to account for variations in velocity due to temperature changes, liquid CO2 entering the valve, etc. You should follow that example even if not playing on a pay-to-play field. The proper sized Allen wrench came with your marker. If you are missing it or have misplaced it, you'll have to figure out which one fits by trial and error. ------------- <Removed overly wide sig. Tsk, you know better.> |
Posted By: liestaylor
Date Posted: 22 September 2012 at 4:42pm
| ok thanks. my friend turned my velocity down to sight in my scope. my scopes off now so im going to turn it up |
Posted By: tallen702
Date Posted: 23 September 2012 at 10:42am
|
Ok, cool. I just get nervous when people use the phrase "crank up the velocity." It tends to signal that someone is wanting to go above 300fps. But yeah, if you're down below 280/290, you definitely need to get back up in that range or you'll be a sitting duck out there. ------------- <Removed overly wide sig. Tsk, you know better.> |