Gun Maintenace and Repair - old 98 custom and cyclone feed

Print Page | Close Window

old 98 custom and cyclone feed

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=191159
Printed Date: 23 December 2024 at 2:27am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: old 98 custom and cyclone feed

Posted By: nt627
Subject: old 98 custom and cyclone feed
Date Posted: 16 April 2013 at 11:26am

so I dusted off an old 98 custom the thing is at least 10 years old. i took it apart, cleaned it, replaced o-rings and stripped screws and such and now she's running great. problem is i want to install the cyclone feed system on it but the power tube doesnt have a hole for the air connection instead it has a peg to secure it on the body.

THE QUESTION:

I've been looking around the internet but can't find a new power tube that explicitly says it is compatible with cyclone and the older 98 customs can anybody point me in the right direction?

Replies:

Posted By: kendall
Date Posted: 16 April 2013 at 12:42pm

I could be mistaken, but I don't think this exists. I have three old 98's that I'm currently rebuilding and modding and I was curious if the same thing. I never I'd fun a solution, and bought a newer ACT with intentions of adapting a cyclone to it. You might be limited to feed options, but there are others on this forum much more knowledgable than I.

Posted By: Parts Tech
Date Posted: 16 April 2013 at 4:36pm

The cyclone is compatible with your older custom 98.
If you need a new power tube, This will work:
http://www.tippmannparts.com/98-21NR-98-Custom-ACT-Pro-RT-Power-Tube-p/gp4114.htm" rel="nofollow - http://www.tippmannparts.com/98-21NR-98-Custom-ACT-Pro-RT-Power-Tube-p/gp4114.htm

-------------
Tech at http://www.tippmannparts.com" rel="nofollow - TippmannParts.com
We do everything Tippmann