Gun Maintenace and Repair - Brand new A5 issues

Print Page | Close Window

Brand new A5 issues

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=191412
Printed Date: 22 December 2024 at 9:39pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Brand new A5 issues

Posted By: dcourt3
Subject: Brand new A5 issues
Date Posted: 14 September 2013 at 3:41pm

I just bought a new A5 with etrigger. I immediately changed to a Tippmann flatline barrel, but made no other changes. When I fire, four or five balls are fed, but then the feeder stops. Manually feeding balls works fine. Any ideas what the cause might be?

Replies:

Posted By: Ceesman762
Date Posted: 17 September 2013 at 9:05am

The cyclone stops working? Are you using CO2 or HPA? If you are running CO2, make sure the tank is full. If you are air, detach and disassemble the cyclone and see if any of the parts are worn or damaged.

-------------
Innocence proves nothing
FUAC!!!!!

Posted By: tallen702
Date Posted: 17 September 2013 at 9:38am

Yeah, I'd also do a soap and water test on the valve tap and line leading to the cyclone system to see if there are any loose connections or fittings that could cause a loss in pressure.

-------------
<Removed overly wide sig. Tsk, you know better.>

Posted By: NANomaD
Date Posted: 17 September 2013 at 2:50pm

Check to see if the airline between the cyclone and the QEV isn't pinched, also, when you put the cyclone back on, did you torque it down all the way until the screw stopped ? If so, back it off a quarter of a turn. Overtightening can cause the feed paddles to bind.