Gun Maintenace and Repair - Response Trigger on A5 problems

Print Page | Close Window

Response Trigger on A5 problems

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=191806
Printed Date: 22 December 2024 at 8:38pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Response Trigger on A5 problems

Posted By: Ih181
Subject: Response Trigger on A5 problems
Date Posted: 20 April 2014 at 1:34am

I have 2 A5s with RT triggers that are malfunctioning. Both are on older A5s running off of a new 20oz bottle and a fresh refill and a remote line. I've searched everywhere for similar problems, read the tippman troubleshooting info, checked all O rings, oiled them, and there is no debis in the line.

Gun 1:
I get about 1 ball per second when holding pressure on the trigger. I've tried the tuning steps but when I fully tighten the flow control I never get that "too hard to pull" feel on the trigger.

Gun 2:
No pressure at all when pulling the trigger. The piston seems to be firing but it only fires semi auto. There is no pressure at all with a fully tightened flow control valve. I've even tried tightening the velocity screw for more back pressure but to no avail.

What should I check next?