Tippmann TPX Rail Cut Mod.
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Upgrades and Customizing
Forum Description: Trick it out!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=192435
Printed Date: 18 April 2024 at 1:07am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Tippmann TPX Rail Cut Mod.
Posted By: spydercam
Subject: Tippmann TPX Rail Cut Mod.
Date Posted: 22 August 2017 at 9:40am
|
Hi, here iīve done something which makes your T(i)PX more better looking ! I cut the rail and filed flat and also filed a channel for the front screw and drillied holes. I used M3 screws cause ... but any other Slim screw will do the Job also well ! May in future Need to check first, i go melt the nuts into plastic of the Shell also drill the top of the holes more wide so the heads will be flat on surface too !!! And yes i know ... but iīm hpa Player so i donīt Need to Change the cartriges. You still have the Option if you take(carry) her as secondary to use her with one fresh cartrige, but for a Change the front screw Needs to be removed !!!         ------------- I like Tippmann !!! |
Replies:
Posted By: spydercam
Date Posted: 22 August 2017 at 2:22pm
|
OK iīve used a screw(for have a Center help when push in) with nut (for melt in the nagative into Shell) to have the bolt(i used a bigger drill for) and nut flat. If you will do this grab the bolt in a good Position which is like if you will go push the hot nut straight angeled into plastic and not cause itīs comfortable to heat it up and than try to fix something which you canīt do, with a hot bolt and nut which melts well if ...       ------------- I like Tippmann !!! |